|
CC5 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film 1010 Size Resistor on Alumina | |||
|
www.vishay.com
CC5-
Vishay Electro-Films
Thin Film 1010 Size Resistor on Alumina
Product may not be to scale
The CC5- series single-value resistor chips offer increased
power in larger size, low shunt capacitance and solder pad
option. The CC5-s nichrome resistors material offers
excellent stability.ï
The CC5- resistors are manufactured using Vishay
Electro-Films (EFI) sophisticated thin film equipment and
manufacturing technology. The CC5- resistors are 100%
electrically tested and visually inspected to MIL-STD-883,
method 2032 class H or K.
FEATURES
⢠Wire bondable
⢠Chip size: 0.100 inches square
⢠Case: 1010
⢠Resistance range: 50 ï to 1 Mï
Available
⢠Alumina substrate
Available
⢠Low stray capacitance: < 0.2 pF
⢠Resistor material: Nichrome
⢠DC power rating: 400 mW
Available
⢠Resistor passivation coat optional
⢠Tolerances to 0.05 %
Available
⢠Solder pad optional
⢠Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Noteï
* This datasheet provides information about parts that areï
RoHS-compliant and/or parts that are non-RoHS-compliant. Forï
example, parts with lead (Pb) terminations are not RoHS-compliant.ï
Please see the information/tables in this datasheet for details.
APPLICATIONS
Vishay EFI CC5- chip resistors have excellent power
dissipation capability and are ideally suited for prototyping.
Not suitable for high moisture applications unless protected.
Typical application areas are:
⢠Amplifiers
⢠Oscillators
⢠Attenuators
⢠Couplers
⢠Filters
Recommended for hermetic environments where die is not
exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
Total Resistance Range
50 to 1M
Standard Tolerances
± 0.05, ± 0.1
TCR
± 10, ± 25, ± 50, ± 100
UNIT
ï
%
ppm/°C
Tightest Standard Tolerance Available
0.1 %
0.05 %
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
50 Ω
100 Ω
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Stability, 1000 h, + 125 °C
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 125 °C (Derated to zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
500 kΩ
1 MΩ
VALUE
- 20 typ.
± 0.1 max. ïR/R
- 55 to + 125
± 0.25 max. ïR/R
± 0.25 max. ïR/R
200
1012 min.
200 max.
0.4 max.
± 0.25 max. ïR/R
UNIT
dB
%
°C
%
%
V
ï
V
W
%
Revision: 27-May-13
1
Document Number: 61005
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |