CC4 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film 0510 Size Resistor on Alumina

www.vishay.com
CC4-
Vishay Electro-Films
Thin Film 0510 Size Resistor on Alumina
Product may not be to scale
The CC4- series single-value resistor chips offer increased
power in larger size, low shunt capacitance and solder pad
option. The CC4- nichrome resistors material offers
excellent stability.
The CC4- resistors are manufactured using Vishay
Electro-Films (EFI) sophisticated thin film equipment and
manufacturing technology. The CC4- resistors are 100 %
electrically tested and visually inspected to MIL-STD-883,
method 2032 class H or K.
FEATURES
• Wire bondable
• Chip size: 0.050" x 0.100"
• Case: 0510
• Resistance range: 50  to 400 k
Available
• Alumina substrate
Available
• Low stray capacitance: < 0.2 pF
• Resistor material: Nichrome
• Resistor passivation coat optional
Available
• Tolerances to 0.05 %
• Solder pad optional
Available
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
APPLICATIONS
Vishay EFI CC4- chip resistors provide excellent
high-frequency response and are ideally suited for
prototyping. Typical application areas are:
• Amplifiers
• Oscillators
• Attenuators
• Couplers
• Filters
Recommended for hermetic environments where die is not
exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
Resistance Range
Tolerances
TCR
50 to 400K
± 0.05, ± 0.1
± 10, ± 25, ± 50, ± 100
Tightest Standard Tolerance Available
UNIT

%
ppm/°C
0.1 %
0.05 %
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
50 Ω
150 Ω
200 kΩ
400 kΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202, Method 106 - Hermetic
Applications
Stability, 1000 h, + 125 °C, 175 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 125 °C (Derated to Zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
VALUE
- 20 typ.
± 0.2 max. R/R
± 0.1 max. R/R
- 55 to + 125
± 0.25 max. R/R
± 0.1 max. R/R
400
10¹² min.
100 max.
0.175 max.
± 0.25 max. R/R
UNIT
dB
%
%
°C
%
%
V

V
W
%
Revision: 27-May-13
1
Document Number: 61004
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000