CC2 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film 0303 Size Resistor on Alumina

www.vishay.com
CC2-
Vishay Electro-Films
Thin Film 0303 Size Resistor on Alumina
Product may not be to scale
The CC2 series single-value resistor chips offer a relatively
small size, low shunt capacitance and solder pad option.
The CC2s nichrome resistor material offers excellent
stability.
The CC2s are manufactured using Vishay Electro Films (EFI)
sophisticated thin film equipment and manufacturing
technology. The CC2s are 100 % electrically tested and
visually inspected to MIL-STD-883.
FEATURES
• Wire bondable
• Chip size: 0.030 inches square
• Case: 0303
• Resistance range: 25  to 38 k
• Alumina substrate
• Low stray capacitance: < 0.2 pF
• Resistor material: Nichrome
• Resistor passivation coat optional
• Tolerances to 0.05 %
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Vishay EFI CC2 chip resistors provide excellent
high-frequency response and are ideally suited for
prototyping.
Typical application areas are:
• Amplifiers
• Oscillators
• Attenuators
• Couplers
• Filters
Recommended for hermetic environments where die is not
exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
Total Resistance Range
25 to 38K
Standard Tolerances
± 0.05, ± 0.1
TCR
± 10, ± 25, ± 50, ± 100
UNIT

%
ppm/°C
0.1 %
0.05 %
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
25 Ω 75 Ω 100 Ω
20 kΩ
38 kΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202, Method 106 - Hermetic
Applications
Stability, 1000 h, + 125 °C, 100 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 125 °C (Derated to Zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
VALUE
- 20 typ.
± 0.2 max. R/R
± 0.1 max. R/R
- 55 to + 125
± 0.25 max. R/R
± 0.1 max. R/R
400
10¹² min.
100
0.100 max.
± 0.25 % max. R/R
UNIT
dB
%
%
°C
%
%
V

V
W
%
Revision: 05-Apr-13
1
Document Number: 61077
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000