AXIOM75ULN Datasheet, PDF (1/3 Pages) Vishay Siliconix – Ultra‐Low Phase Noise OCXO

Specification AXIOM75ULN
Rev.: 01 Date: 2012‐01‐28
Oscillator type : Ultra‐Low Phase Noise OCXO
Parameter
Frequency Range
Standard frequencies
Frequency stability
Initial tolerance at delivery
vs. temperature in operating
temperature range
operating temperature range
vs. supply voltage variation
vs. load change
Long term (aging) per day,
after 30 days operation
long term (aging) 1^st year,
after 30 days operation
Frequency adjustment range
Electronic Frequency Control (EFC)
EFC voltage V_C
EFC slope (∆f / ∆V_C)
EFC input impedance
RF output
Signal waveform
Output level
Harmonics
Spurious
Warm‐up time
Phase noise @ 10.000 MHz
Reference voltage VREF output
Supply voltage V_S
Current consumption (steady state)
Current consumption (warm‐up)
Operable temperature range
Storage temperature range
Enclosure (see drawing) (LxWxH)
Weight
Handling and Testing
Processing
min. typ. max. Unit Condition
80
125
100.000 /120.000
MHz
± 500 ppb @+25°C @V_C = VREF/2
± 200 ppb Option II = “200”
± 100 ppb Option II = “100”
± 50 ppb Option II = “50”
± 25 ppb Option II = “25”
± 10 ppb Option II = “10”
‐10
+60 °C
Note 2
± 10 ppb V_S ± 5%
± 5 ppb R_L ± 5%
±5
± 10 ppb Option II=“200”, “100”
±1
± 2 ppb Option II=“50”,“25”,”10”
± 200 ppb Option II=“200”, “100”
± 100 ppb Option II=“50”,“25”,”10”
±1
±2
ppm
0
VREF V
positive
100
kΩ
Sine wave
+7
dBm
‐30 dBc
‐90 dBc
5 min
See table below
10.0
V
11.4 12
12.6 V
100 mA
250 mA
‐20
+70 °C
‐40
+85 °C
25.8x25.8x12.7max. mm
10 gram
In accordance with AXAN‐011
In accordance with AXAN‐012
R_L = 50 Ω
∆f_final/f₀ < ±0.1 ppm
Option I
Note 3
@ +25°C
IEC 60679‐3 CO 43
www.axtal.com
www.axtal.com
Notes:
1.
2.
3.
Terminology and test conditions are according to IEC standard IEC60679‐1, unless otherwise stated
Other operating temperature range on request
Other supply voltage on request
GmbH & Co. KG
Roemerring 9
D‐74821 Mosbach
Germany
AXIOM75ULN
page 1(3)
www.axtal.com
fon: [phone]
fax: [phone]
E‐mail: [e-mail]