A223K15X7RF5TAA Datasheet, PDF (1/8 Pages) Vishay Siliconix – Axial Leaded Multilayer Ceramic Capacitors for General Purpose Class 1, Class 2 and Class 3, 50 VDC, 100 VDC, 200 VDC, 500 VDC

www.vishay.com
A Series
Vishay BCcomponents
Axial Leaded Multilayer Ceramic Capacitors for General Purpose
Class 1, Class 2 and Class 3, 50 V_DC, 100 V_DC, 200 V_DC, 500 V_DC
FEATURES
• High capacitance with small size
• High reliability
• Axial mounting style
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Temperature compensation
• Coupling and decoupling
QUICK REFERENCE DATA
DESCRIPTION
Ceramic Class
1
Ceramic Dielectric
C0G
Voltage (V_DC)
50
Min. Capacitance (pF)
10
100
200
10
33
Max. Capacitance (pF) 10 000 5600
2200
Mounting
500
33
1000
VALUE
2
X7R
50
100
200
100
100
100
1 000 000 220 000 47 000
Axial
500
100
33 000
3
Y5V
50
100
10 000 10 000
1 000 000 220 000
MARKING
Marking indicates capacitance value and tolerance in
accordance with “EIA 198” and voltage marks.
OPERATING TEMPERATURE RANGE
C0G, X7R: - 55 °C to + 125 °C
Y5V: - 30 °C to + 85 °C
TEMPERATURE CHARACTERISTICS
Class 1: C0G
Class 2: X7R
Class 3: Y5V
SECTIONAL SPECIFICATIONS
Climatic category (acc. to EN 60058-1)
Class 1 and 2: 55/125/21
Class 3: 30/85/21
APPROVALS
EIA 198
IEC 60384-9
DESIGN
• The capacitors consist of a general purpose MLCC
• The lead wires are 0.5 mm and are made of 100 % tinned
copper clad steel wire
• Coating is made of yellow colored flame retardant epoxy
resin in accordance with UL 94 V-0
CAPACITANCE RANGE
10 pF to 1 μF
TOLERANCE ON CAPACITANCE
± 5 %, ± 10 %, ± 20 %, + 80 %/- 20 %
RATED VOLTAGE
50 V_DC, 100 V_DC, 200 V_DC, 500 V_DC
TEST VOLTAGE
• 50 V_DC and 100 V_DC: 250 % of rated voltage
• 200 V_DC: 150 % of rated voltage + 100 V_DC
• 500 V_DC: 130 % of rated voltage + 100 V_DC
INSULATION RESISTANCE AT 500 V_DC
• 50 V_DC and 100 V_DC: 100 G or 1000 F whichever is less
at rated voltage within 2 min of charging
• 200 V_DC and 500 V_DC: 10 G or 100 F whichever is less
at rated voltage within 2 min of charging
DISSIPATION FACTOR
Class 1:
0.1 % max. when C  30 pF
(at 1 MHz; 1 V where C  1000 pF, 
and at 1 kHz; 1 V where C > 1000 pF)
For C < 30 pF: DF = 100/(400 + 20 x C)
DF = Disspation factor in %;
C = Capacitance value in pF
Class 2:
2.5 % max. (at 1 kHz; 1 V)
Class 3:
5 % max. (at 1 kHz; 1 V)
Revision: 20-Aug-13
1
Document Number: 45164
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000