94SVP_12 Datasheet, PDF (1/4 Pages) Vishay Siliconix – SMD Aluminum Solid Capacitors with Conductive Polymer

www.vishay.com
94SVP
Vishay OS-CON
SMD Aluminum Solid Capacitors with Conductive Polymer
FEATURES
• Vishay OS-CON series utilizes a polymerized
organic semiconductor as electrolyte
• Features superior heat-proof characteristics
compared with previous OS-CON series
• For power supply and other applications where
high ripple current and low impedance are necessary
• Rated ripple current values are guaranteed at 105 °C
• No need to consider derating on maximum allowable
ripple current
• SMD version with base plate, containing no lead (Pb)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION
Operating temperature range
Capacitance tolerance at 120 Hz
Tangent of loss angle (tan ) at 120 Hz
Leakage current (μA/2 min) (or less) ⁽¹⁾
Equivalent series resistance (), (100 kHz to 300 kHz)
Characteristics at high temp. and low temp.
Impedance ratio at 100 kHz, + 20 °C
Endurance + 105 °C, 2000 h
Rated voltage applied (20 V for 25 V products)
(1000 h for A5/B6 sizes)
Damp heat (steady state)
(+ 60 °C, 90 % to 95 % RH, 1000 h, no voltage)
(500 h for A5/B6 sizes)
Reverse voltage guarantee
Solder heat resistance (VPS) ⁽²⁾
(230 °C x 75 s)
(Please consult us for A5/B6 sizes)
VALUE
- 55 °C to + 105 °C
M: ± 20 %
Values in Electrical Data and Ordering Information table
Values in Electrical Data and Ordering Information table
Values in Electrical Data and Ordering Information table
- 55 °C
+ 105 °C
C/C
Z/Z_{20 °C}
Z/Z_{20 °C}
0.75 to 1.25
0.75 to 1.25
Within ± 20 %
tan 
 1.5 x the value of tangent of loss angle
ESR
 1.5 x the value of ESR
Leakage current
 the value of leakage current
C/C
Within ± 20 %
tan 
 1.5 x the value of tangent of loss angle
ESR
 1.5 x the value of ESR
Leakage current
 the value of leakage current after voltage treatment
Temporary: < 20 % of the rated voltage
Continuous: < 10 % of the rated voltage
C/C
Within ± 10 %
tan 
 1.3 x the value of tangent of loss angle
ESR
 1.3 x the value of ESR
Leakage current
 the value of leakage current after voltage treatment
Notes
(1) _{If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage treatment: The rated voltage is applied to Vishay}
OS-CON (2.5 WV to 20 WV) for 120 min at 105 °C. (However, 20 V is applied to a 25 WV Vishay OS-CON).
(2) _{Refer to Soldering Profile and Land Pattern document www.vishay.com/doc?90014 for soldering recommendation.}
DIMENSIONS in millimeters
0.2 max.
W
ØD
L
H
PC
R ⁽⁺⁾
SIZE CODE
A5
B6
C6
E7
F8
E12
F12
ØD
± 0.5
4.0
5.0
6.3
8.0
10.0
8.0
10.0
L
max.
5.5
6.0
6.0
7.0
8.0
12.0
12.7
W
± 0.2
4.3
5.3
6.6
8.3
10.3
8.3
10.3
H
± 0.2
4.3
5.3
6.6
8.3
10.3
8.3
10.3
C
± 0.2
5.0
6.0
7.3
9.0
11.0
9.0
11.0
R
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.8 to 1.1
0.8 to 1.1
P
± 0.2
1.0
1.4
2.1
3.2
4.6
3.2
4.6
Revision: 28-Aug-12
1
Document Number: 90021
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000