94SVPD_15 Datasheet, PDF (1/13 Pages) Vishay Siliconix – SMD Aluminum Solid Capacitors with Conductive Polymer

www.vishay.com
94SVPD
Vishay OS-CON
SMD Aluminum Solid Capacitors with Conductive Polymer
FEATURES
• New OS-CON 94SVPD series provides
improved characteristics with up to 125 °C
temperature capability and 35 V maximum
voltage rating in a SMD package
• Improved damp heat (steady state) 85 °C x 85 %
RH performance
• Suitable for use in smoothing circuits of vehicle-mounted
equipment, industrial equipment, etc.
• This product can support lead (Pb)-free reflow ⁽²⁾
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION
Operating temperature range
Capacitance tolerance
Tangent of loss angle (tan )
Leakage current (μA/2 min) (or less) ⁽¹⁾
ESR
Characteristics of impedance ratio
at high and low temperature
Endurance
Damp heat (steady state)
Solder heat resistance ⁽²⁾
CONDITIONS
-
120 Hz
120 Hz
After 2 min
-
100 kHz, + 20 °C
+ 125 °C, 2000 h
rated voltage applied
+ 85 °C, 85 % to 90 % RH,
1000 h
rated voltage applied
(VPS)
(230 °C x 75 s)
VALUE
- 55 °C to + 125 °C
M: ± 20 %
 values in Electrical Data and Ordering Information table
 values in Electrical Data and Ordering Information table
 values in Electrical Data and Ordering Information table
- 55 °C
+ 125 °C
C/C
Z/Z_{20 °C}
0.75 to 1.25
Z/Z_{20 °C}
0.75 to 1.0
Within ± 20 %
tan 
2 x or < than an initial standard
ESR
2 x or < than an initial standard
Leakage current
Below an initial standard
C/C
Within ± 20 %
tan 
2 x or < than an initial standard
ESR
2 x or < than an initial standard
Leakage current
Below an initial standard
C/C
Within ± 10 %
tan 
1.3 x or < than an initial standard
ESR
1.3 x or < than an initial standard
Leakage current
Below an initial standard
(after voltage procesing)
Notes
(1) _{If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage treatment: The rated voltage is applied (10 V to}
35 V) for 120 min at 125 ºC.
(2) _{Refer to “Recommended Reflow Profile” for maximum temperatures.}
DIMENSIONS in millimeters
Series
C6 size is PD
E7, F8, E12, F12
size is SVPD
Polarity marking (Cathode)
Case No.
003
SVPD
47
35
Rated capacitance
Rated voltage
SIZE CODE
C6
E7
F8
E12
F12
Ø D ± 0.5
6.3
8.0
10.0
8.0
10.0
L + 0.1/- 0.4
5.9
6.9
7.9
11.9
12.6
W ± 0.2
6.6
8.3
10.3
8.3
10.3
0.2 max.
W
L
H ± 0.2
6.6
8.3
10.3
8.3
10.3
C ± 0.2
7.3
9.0
11.0
9.0
11.0
R ⁽⁺⁾
R
0.6 to 0.8
0.6 to 0.8
0.6 to 0.8
0.8 to 1.1
0.8 to 1.1
P ± 0.2
2.1
3.2
4.6
3.2
4.6
Revision: 03-Aug-12
1
Document Number: 90022
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000