94SVP Datasheet, PDF (1/4 Pages) Vishay Siliconix – Vertical Surface Mounting Capacitors

94SVP
Vishay OS-CON
Vertical Surface Mounting Capacitors
Fig.1 Component outline
FEATURES
• New Vishay OS-CON series as results of
polymerized organic semiconductor as
electrolyte
RoHS
• Features superior heat-proof characteristics COMPLIANT
compared with previously developed Vishay
OS-CON series
• Particularly effective when used as surface mounting
devices of the switching power supply
• Rated ripple current values are guaranteed at 105 °C
• No need to consider derating on maximum allowable ripple
current
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Operating Temperature Range
- 55 °C to + 105 °C
Capacitance Tolerance at 120 Hz
M: ± 20 %
Tangent of Loss Angle (tan δ) at 120 Hz
Values in Standard Ratings Table
Leakage Current (µA/2 minutes) (or less)*
Values in Standard Ratings Table
Equivalent Series Resistance (Ω), (100 k to 300 kHz)
Values in Standard Ratings Table
Characteristics at high temp. and low temp.
Impedance Ratio at 100 kHz, + 20 °C
Endurance + 105 °C, 2000 hours
Rated Voltage Applied (25 WV to 20 V)
(1000 hours for A5/B6 sizes)
- 55 °C
+ 105 °C
ΔC/C
tan δ
ESR
Z/Z_{20 °C}
1.0 to 1.25
Z/Z_{20 °C}
0.75 to1.0
Within ± 20 %
≤ 1.5 x the value of Tangent of Loss Angle
≤ 1.5 x the value of ESR
Leakage Current
≤ The Value of Leakage Current
Damp heat (Steady state)
ΔC/C
Within ± 20 %
(+ 60 °C, 90 to 95 % RH, 1000 hours, no voltage)
(500 hours for A5/B6 sizes)
Reverse Voltage Guarantee
Solder heat resistance (VPS)**
tan δ
≤ 1.5 x the value of Tangent of Loss Angle
ESR
≤ 1.5 x the value of ESR
Leakage Current
≤ The Value of Leakage Current after Voltage
Treatment
Temporary: < 20 % of the rated voltage
Continuous: < 10 % of the rated voltage
ΔC/C
Within ± 10 %
(215 °C x 90 s) or (230 °C x 60 s)
tan δ
≤ 1.3 x the value of Tangent of Loss Angle
(Please consult us for A5/B6 sizes)
ESR
≤ 1.3 x the value of ESR
Leakage Current
≤ The Value of Leakage Current after Voltage
Treatment
* If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage Treatment: The rated voltage is applied to Vishay
OS-CON (2.5 to 20 WV) for 120 minutes at 105 °C. (However, 20 V is applied to a 25 WV Vishay OS-CON).
** Refer to Standard Ratings table for soldering recommendation.
DIMENSIONS in millimeters
ØD
DIMENSIONS in millimeters
SIZE ∅ D L
W
H
C
CODE ± 0.5 max. ± 0.2 ± 0.2 ± 0.2
A5
4.0 5.5 4.3 4.3 5.0
B6
5.0 6.0 5.3 5.3 6.0
C6
6.3 6.0 6.6 6.6 7.3
E7
8.0 7.0 8.3 8.3 9.0
F8 10.0 8.0 10.3 10.3 11.0
E12 8.0 12.0 8.3 8.3 9.0
F12 10.0 12.7 10.3 10.3 11.0
R
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.8 to 1.1
0.8 to 1.1
P
± 0.2
1.0
1.4
2.1
3.2
4.6
3.2
4.6
www.vishay.com
308
For technical questions contact: [e-mail]
Document Number: 90021
Revision: 26-Jun-06