|
94SC Datasheet, PDF (1/3 Pages) Vishay Siliconix – Solid Aluminum Capacitors With Organic Semiconductor Electrolyte | |||
|
94SC
Vishay OS-CON
Solid Aluminum Capacitors
With Organic Semiconductor Electrolyte
FEATURES
⢠Designed for general use.
⢠Superior high frequency characteristics.
⢠94SC capacitors are suitable for use in noise limiters and
switching power supplies.
Fig.1 Component outline.
PART MARKING Sleeve color: Blue. Marking: White
⢠Polarity -
⢠Rated voltage
⢠Capacitance
⢠Vishay OS-CON
⢠Lot number
⢠Maximum operating temperature (+ 105 ËC)
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Operating Temperature Range
- 55 ËC to + 105 ËC
Capacitance Tolerance at 120 Hz
X0 = ± 20 %
Tangent of Loss Angle (tan δ) at 120 Hz
⤠Values in Standard Ratings Table
Leakage Current (µA/2 minutes)(or less)*
6.3 to 25 WV: 0.01 CV or 0.5
30WV: 0.0.2 CV or 0.1 (Whichever is greater)
Equivalent Series Resistance (â¦), (100 k to 300 kHz)
⤠Values in Standard Ratings Table
Temperature Characteristics
Impedance Ratio at 100 kHz
High Temperature Load (+ 105 ËC, 2000 hours)
Rated Voltage Applied
(25 WV - 20 V applied)**
Moisture Resistance
(+ 60 ËC, 90 to 95 % RH, 1000 hours, no voltage)
- 55 ËC
+ 105 ËC
âC/C
tan δ
Leakage Current
âC/C
tan δ
Z/Z20 ËC
1.0 to 1.25
Z/Z20 ËC
0.75 to 1.0
Within ± 20 % of the initial value
⤠1.5 x the value of Tangent of Loss Angle
⤠The Value of Leakage Current
Within ± 10 % of the initial value
⤠1.5 x the value of Tangent of Loss Angle
Leakage Current
⤠The Value of Leakage Current
Reverse Voltage Guarantee
Temporary: ⤠20 % of the rated voltage
Continuous: ⤠10 % of the rated voltage
* If any doubt arises, measure the current after applying voltage (voltage treatment) for 30 minutes at + 105 ËC. The rated voltage should be
applied for 6.3 to 16.3 WV, while temperature reduction voltage should be applied for 25 WV.
** To use a Vishay OS-CON capacitor when the operating temperature exceeds + 85 ËC on a component with a rated voltage of 25 V, reduce
the voltage by 0.25 V for every degree (1 ËC) relative to the value at + 85 ËC (25 V).
TEMPERATURE COEFFICIENT RIPPLE CURRENT
Ambient Temperature
~ + 45 ËC
+ 85 ËC
+ 95 ËC
+ 105 ËC
Coefï¬cient
1.0
0.7
0.4
0.25
DIMENSIONS in inches [millimeters]
CASE
CODE
A
B
C
D
E
F
NOMINAL CASE SIZE
â
DxL
0.157 x 0.268 [4.0 x 6.8]
0.197 x 0.268 [5.0 x 6.8]
0.248 x 0.268 [6.3 x 6.8]
0.248 x 0.386 [6.3 x 9.8]
0.315 x 0.413 [8.0 x 10.5]
0.394 x 0.413 [10.0 x 10.5]
F
0.079 [2.0]
0.079 [2.0]
0.098 [2.5]
0.098 [2.5]
0.138 [3.5]
0.20 [5.0]
â
d
0.018 [0.45]
0.018 [0.45]
0.018 [0.45]
0.236 [0.60]
0.236 [0.60]
0.236 [0.60]
G (Max.)
0.020 [0.5]
0.020 [0.5]
0.020 [0.5]
0.020 [0.5]
0.031 [0.8]
0.031 [0.8]
Document Number: 90004
Revision: 13-Sep-04
For technical questions contact: aluminumcaps4@vishay.com
K (Max.)
0.020 [0.5]
0.020 [0.5]
0.020 [0.5]
0.020 [0.5]
0.031 [0.8]
0.031 [0.8]
www.vishay.com
311
|
▷ |