860 Datasheet, PDF (1/4 Pages) Littelfuse – Panel Mount, Shocksafe 5x20mm / 6.3x32mm Fuses

Model 830, 860
Vishay Spectrol
1 - 13/16” (46mm) Three and Ten Turn Wirewound
Precision Potentiometer
FEATURES
• 830: 15Ω to 50KΩ, Three-Turn
• 860: 20Ω to 200KΩ, Ten-Turn
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance
Standard Range
Tolerance:
200Ω and above
Below 200Ω
Linearity (Independent)
15Ω to 1KΩ
1KΩ to 5KΩ
5KΩ to 25KΩ
25KΩ and above
20Ω to 50Ω
50Ω to 200Ω
200Ω to 5KΩ
5KΩ and above
Noise
Rotation
Power Rating
Insulation Resistance
Dielectric Strength
Absolute Minimum Resistance
End Voltage
Phasing
Taps (Extra)
ORDERING INFORMATION
MODEL 830
MODEL 860
15Ω to 50KΩ
Special to 150KΩ
STANDARD
± 3%
± 5%
20Ω to 200KΩ
Special to 500KΩ
SPECIAL
± 1%
± 3%
± 0.25% standard
± 0.15%
± 0.10%
± 0.075%
± 0.05%
–
–
–
–
–
–
–
–
± 0.15%
± 0.10%
± 0.05%
± 0.025%
100Ω ENR for both models
1080° + 4° - 0°
3600° + 4° - 0°
3.0 watts at 40°C
derated to zero at 125°C
8.0 watts at 40°C
derated to zero at 125°C
1000MΩ minimum 500VDC
1000V_RMS, 60Hz
Not to exceed linearity x total resistance or 1Ω,
whichever is greater
0.5% of total applied voltage maximum
CCW End Points sect. 2 phased to
sect 1 within 1°
42 available as special
standard tolerance ± 1°
108 available as special
standard tolerance ± 1°
Models 830 and 860 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on
your order, please state:
830, 860
1
1
XXX
MODEL
BUSHING MOUNT
NUMBER OF SECTIONS
RESISTANCE OF EACH
SECTION
Beginning with the section nearest
the mounting end
Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity
tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead
time for delivery.
www.vishay.com
110
For technical questions, contact [e-mail]
Document Number: 57073
Revision 16-Jul-03