82159 Datasheet, PDF (1/7 Pages) Vishay Siliconix – IR Receiver Modules for Remote Control Systems

VISHAY
TSOP11..SK1
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
Description
The TSOP11..SK1 - series are miniaturized receivers
for infrared remote control systems. PIN diode and
preamplifier are assembled on lead frame, the epoxy
package is designed as IR filter.
The demodulated output signal can directly be
decoded by a microprocessor. The main benefit is the
operation with short burst transmission codes and
high data rates.
Features
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against electrical field
disturbance
• TTL and CMOS compatibility
• Output active low
• Low power consumption
• High immunity against ambient light
Special Features
• Enhanced data rate up to 4000 bit/s
• Operation with short bursts possible
(≥ 6 cycles/burst)
Parts Table
Part
TSOP1130SK1
TSOP1133SK1
TSOP1136SK1
TSOP1137SK1
TSOP1138SK1
TSOP1140SK1
TSOP1156SK1
13 646
Carrier Frequency
30 kHz
33 kHz
36 kHz
36.7 kHz
38 kHz
40 kHz
56 kHz
Block Diagram
2
25 kΩ
V_S
3
Input
AGC
Band Demo-
Pass dulator
OUT
1
PIN
Control Circuit
GND
Application Circuit
16842
Transmitter _TSOPxxxx
R₁ = 100 Ω
with
TSALxxxx
V_S
C₁ =
4.7 µF
OUT
GND
V_O
+V_S
µC
GND
R₁ + C₁ recommended to suppress power supply
disturbances.
The output voltage should not be hold continuously at
a voltage below V_O = 3.3 V by the external circuit.
Document Number 82159
Rev. 2, 05-May-03
www.vishay.com
1