790D106X0025B2BE3 Datasheet, PDF (1/9 Pages) Vishay Siliconix – Resin-Molded, Radial-Lead Solid Tantalum Capacitors

www.vishay.com
790D
Vishay Sprague
Resin-Molded, Radial-Lead
Solid Tantalum Capacitors
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
FEATURES
• Terminations: Tin/lead (SnPb), 100 % tin (Sn)
• Four case sizes precisely molded with a flame
retardant epoxy resin
• Stand off on all case sizes
• Available on tape for automatic insertion
equipment (only A- and B-case, C- and D-case
on request)
• Low leakage current
• Low impedance
• Extended value ranges available
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
Capacitance Range: 0.1 μF to 330 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 6.3 V_DC to 50 V_DC
ORDERING INFORMATION
790D
157
X0
MODEL CAPACITANCE CAPACITANCE
TOLERANCE
006
DC VOLTAGE
RATING
R
CASE
CODE
2
STYLE
NUMBER
P
PACKAGING
E3
RoHS
COMPLIANT
790D =
Standard
and
extended
range
Expressed in
picofarads.
The first two
digits are the
significant
figures. The
third is the
number of
zeros following.
X0 = ± 20 %
X9 = ± 10 %
Expressed in
volts. To
complete the
three-digit
block, zeros
precede the
voltage rating.
A decimal
point is indicated
by an “R”
(6R3 = 6.3 V)
See
Ratings
and Case
Codes
table
Insulated
case
(standard)
See packing information
B: Bulk
G: Ammopack
(H = 16.5 mm)
H: Ammopack
(H = 18.5 mm)
I: Ammopack shouldered
leads (A case)
X: Reel pack
(H = 16.5 mm)
Y: Reel pack
(H = 18.5 mm)
Z: Reel pack shouldered
leads (A case)
E3 = 100 %
tin termination
(RoHS
compliant)
Blank = SnPb
termination
DIMENSIONS in inches [millimeters]
H 0.3 mm
T
MIN. ₊
CASE CODE
A
B
C
D
12 mm
min.
H MAX.
0.287 [7.3]
0.413 [10.5]
0.413 [10.5]
0.413 [10.5]
Ø
e
D MAX.
0.185 [4.7]
0.287 [7.3]
0.484 [12.3]
0.484 [12.3]
T MAX.
0.165 [4.2]
0.189 [4.8]
0.287 [7.3]
0.484 [12.3]
D
E ± 0.15 [0.006]
0.100 [2.54]
0.200 [5.08]
0.400 [10.16]
0.400 [10.16]
Ø 0.05 [0.002] (+ 10 %)
0.020 [0.5]
0.020 [0.5]
0.024 [0.6]
0.024 [0.6]
Revision: 18-Jun-12
1
Document Number: 42072
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000