769D_08 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode,TANTALEX® Capacitors, CECC 30202-013 Approved

769D (CECC 30202-013)
Vishay
Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode,
TANTALEX^® Capacitors, CECC 30202-013 Approved
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
Capacitance Tolerance: ± 20 % is standard; ± 10 % and
± 5 % available as specials.
Capacitance Range: 3.6 µF to 2200 µF
Life Test: Capacitors are capable of withstanding a 2000 h
life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
FEATURES
• Terminations: standard tin/lead (SnPb),
100 % Tin (RoHS compliant) available
• For 125 °C operation
• Very high CV per unit volume
• Long shelf life in excess of ten years
• Extremely low leakage current
• Epoxy end-filled for better shock and
performance
Pb-free
Available
RoHS*
COMPLIANT
vibration
APPROVALS
• CECC 30202-013 (6-125 V)
APPLICATIONS
Designed for industrial and telecommunications
applications, offers higher microfarad value per unit volume
than any other type. The epoxy resin end-fill construction
also offers improved mechanical strength, outstanding
resistance to temperature cycling, and trouble-free
application when flow-soldering capacitors to printed circuit
board.
ORDERING INFORMATION
769D
306
X0
MODEL CAPACITANCE CAPACITANCE
TOLERANCE
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros to
follow
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
Special Order
006
DC VOLTAGE RATING
AT + 85 °C
This is expressed in
volts. To complete the
three-digit block, zeros
precede the voltage
rating
A
CASE CODE
2
STYLE NUMBER
See Ratings
0 = Bare case.
and Case 2 = Outer plasitc-film
Codes Table
insulation
E3
RoHS COMPLIANT
E3 = tin termination
(RoHS compliant
design)
Blank = SnPb
termination (standard
design)
Note
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to
the unit weight.
DIMENSIONS in inches [millimeters]
EPOXY RESIN
Ød
+
L2
L1
L2
D
CASE CODE
A
B
C
D
L₁ + 031 - 0.078
[+ 0.8 - 2.0]
0.535 [13.6]
0.724 [18.4]
0.846 [21.5]
1.129 [28.7]
WITH OUTER PLASTIC -FILM INSULATION
D ± 0.015
[± 0.4]
L₂
0.192 [4.9]
0.984 [25]
0.283 [7.2]
0.984 [25]
0.377 [9.6]
0.984 [25]
0.377 [9.6]
0.984 [25]
* Pb containing terminations are not RoHS compliant, exemptions may apply
Ød
+ 10 %
± 0.002
0.023 [0.6]
0.023 [0.6]
0.023 [0.6]
0.023 [0.6]
Document Number: 40055
Revision: 03-Jul-07
For technical questions, contact: [e-mail]
www.vishay.com
29