6KA24_11 Datasheet, PDF (1/4 Pages) Vishay Siliconix – PAR Transient Voltage Suppressors

6KA24
Vishay General Semiconductor
PAR^® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
P600
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
• T_J = 185 °C capability suitable for high
reliability and automotive requirement
• Excellent clamping capability
• Low leakage current
• High surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
V_WM
P_PPM (10 x 1000 µs)
P_PPM (10 µs/50 ms)
P_D
I_RSM
I_FSM
T_J max.
24 V
6000 W
2000 W
6.5 W
90 A
400 A
185 °C
TYPICAL APPLICATIONS
Use in sensitive electronics protection against
voltage transients induced by inductive load switching
and lighting, especially for automotive load dump
protection application.
MECHANICAL DATA
Case: P600, molded epoxy over passivated junction
Molding compound meets UL 94 V-0 flammability
rating
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Peak pulse power dissipation
with 10/1000 µs waveform ⁽¹⁾
with 10 µs/50 ms waveform ⁽²⁾
P_PPM
LIMIT
6000
2000
Power dissipation on infinite heatsink at T_L = 75 °C (fig. 3)
Maximum working stand-off voltage
Peak forward surge current 8.3 ms single half sine-wave ⁽³⁾
Operating junction and storage temperature range
P_D
V_WM
I_FSM
T_J, T_STG
6.5
24
400
- 65 to + 185
Notes
(1) _{Non-repetitive current pulse, per fig. 2, with a 10/1000 µs waveform}
(2) _{Non-repetitive current pulse, per fig. 5, with a 10 µs/50 ms waveform}
(3) _{Measured on 8.3 ms half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum}
UNIT
W
W
V
A
°C
Document Number: 88309 For technical questions within your region, please contact one of the following:
Revision: 08-Feb-11
[e-mail], [e-mail], [e-mail]
www.vishay.com
1