695D Datasheet, PDF (1/10 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors TANTAMOUNT, Conformal Coated

Solid Tantalum Chip Capacitors
TANTAMOUNT^®, Conformal Coated
FEATURES
695D
Vishay Sprague
• Pad compatible with 194D and MIL-C-556365/4 (CWR06).
• 8mm, 12mm 16mm Tape to EIA-481-2 and reeling per IEC
286-3. 7" [178mm] standard. 13" [330mm] available.
• Terminations: Tin (2) standard.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 85°C. (To + 125°C
with voltage derating.)
Capacitance Range: .10µF to 270µF
Capacitance Tolerance: ±10%, ±20% standard.
Voltage Rating: 4 WVDC to 50 WVDC.
ORDERING INFORMATION
695D
TYPE
475
CAPACITANCE
X0
004
CAPACITANCE DC VOLTAGE RATING
TOLERANCE
@ + 85°C
A
CASE CODE
2
TERMINATION
T
PACKAGING
This is expressed in picofarads.
The first two digits are the
significant figures. The third is the
number of zeros to follow.
X0 = ± 20%
X9 = ± 10%
This is expressed in volts.
To complete the three-
digit block, zeros precede
the voltage rating.
See Ratings ^{2 = 100% Tin. T = Tape and Reel}
and Case
Codes Table.
4 = Gold Plated.
8 = Solder Plated
(60/40) Special
Order.
7" [178mm] Reel
W = 13" [330mm] Reel
(1/2 reel minimum)
See Tape and Reel Specifications
NOTE: Preferred Tolerances and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage
substitutions will be marked with the higher voltage rating.
DIMENSIONS in inches [millimeters]
W
Tantalum Wire Nib
Identifies Anode (+)
Terminal
L
D
B
J
J
A
H
CASE
CODE
A
B
D
E
F
G
H
L (Max.)
0.135
[3.4]
0.185
[4.7]
0.185
[4.7]
0.235
[6.0]
0.255
[6.5]
0.300
[7.6]
0.303
[7.7]
D (Ref.)
0.100
[2.54]
0.150
[3.81]
0.140
[3.56]
0.200
[5.08]
0.220
[5.59]
0.260
[6.60]
0.265
[6.73]
W
0.050 ± 0.015
[1.27 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.095 ± 0.015
[2.41 ± 0.38]
0.095 ± 0.015
[2.41 ± 0.38]
0.135 ± 0.015
[3.43 ± 0.38]
0.100 ± 0.015
[2.54 ± 0.38]
0.150 ± 0.015
[3.81 ± 0.38]
H
0.050 ± .015
[1.27 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.038]
0.050 ± 0.015
[1.27 ± 0.38]
0.070 ± 0.015
[1.78 ± 0.38]
0.100 ± 0.015
[2.54 ± 0.38]
0.110 ± 0.015
[2.79 ± 0.38]
A
0.023 ± 0.010
[0.584 ± 0.25]
0.040 ± 0.015
[1.02 ± 0.38]
0.040 ± 0.015
[1.02 ± 0.38]
0.040 ± 0.015
[1.02 ± 0.38]
0.040 ± 0.015
[1.02 ± 0.38]
0.040 ± 0.015
[1.02 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
B
0.067 ± 0.015
[1.70 ± 0.38]
0.120 ± 0.015
[3.05 ± 0.38]
0.110 ± 0.020
[2.79 ± 0.51]
0.170 ± 0.020
[4.32 ± 0.51]
0.185 ± 0.020
[4.70 ± 0.51]
0.220 ± 0.020
[5.59 ± 0.51]
0.220 ± 0.020
[5.59 ± 0.51]
Note: The anode termination (D less B) will be a minimum of 0.010" [0.3mm]. T Case = 0.005" [0.13mm] minimum.
J (Max.)
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
Document Number 40038
Revision 15-Feb-05
For technical questions, contact [e-mail]
www.vishay.com
127