5KP33AHE3-54 Datasheet, PDF (1/5 Pages) Vishay Siliconix – TRANSZORB Transient Voltage Suppressors

www.vishay.com
5KP5.0A thru 5KP188A
Vishay General Semiconductor
TRANSZORB^® Transient Voltage Suppressors
P600
FEATURES
• P600 glass passivated chip junction
• Available in uni-directional polarity only
• 5000 W peak pulse power capability with
a 10/1000 μs waveform, repetitive rate
(duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
V_WM
V_BR
5.0 V to 188 V
6.4 V to 231 V
P_PPM
5000 W
P_D
8.0 W
I_FSM
500 A
T_J max.
175 °C
Polarity
Uni-directional
Package
P600
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: Molded epoxy body over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
Peak pulse power dissipation with a 10/1000 μs waveform ⁽¹⁾
P_PPM
5000
Peak pulse current with a 10/1000 μs waveform ⁽¹⁾
I_PPM
See next table
Power dissipation on infinite heatsink at T_L = 75 °C (fig. 5)
P_D
8.0
Peak forward surge current 8.3 ms single half sine-wave (fig. 5)
I_FSM
600
Instantaneous forward voltage at 100 A ⁽²⁾
V_F
3.5
Operating junction and storage temperature range
T_J, T_STG
- 55 to + 175
Notes
(1) _{Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2}
(2) _{Measured 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum}
UNIT
W
A
W
A
V
°C
Revision: 20-Nov-12
1
Document Number: 88308
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000