597D477X0010E2T Datasheet, PDF (1/4 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors TANTAMOUNT®, Ultra-Low ESR, Conformal Coated, Maximum CV

597D
Vishay Sprague
Solid Tantalum Chip Capacitors TANTAMOUNT^®,
Ultra-Low ESR, Conformal Coated, Maximum CV
FEATURES
• New case size offerings
• Case profiles: E case (4 mm) and R case
(3.6 mm)
• Low profile case: V case (2 mm)
• Terminations: Tin (2) standard
• Extremely low ESR
• Ripple current up to 4.1 A
Pb-free
Available
RoHS*
COMPLIANT
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Note: Refer to doc. 40088
Capacitance Range: 22 µF to 1500 µF
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 4 WVDC to 50 WVDC
ORDERING INFORMATION
597D
687
X0
TYPE
CAPACITANCE
CAPACITANCE
TOLERANCE
6R3
DC VOLTAGE RATING
AT + 85 °C
E
2
CASE CODE TERMINATION
T
REEL SIZE AND
PACKAGING
This is expressed in
picofarads. The first two
digits are the significant
figures. The third is the
number of zeros to
follow.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an "R"
(6R3 = 6.3 V).
See Ratings
and Case
Codes Table
2 = 100 % Tin
8 = Solder
Plated (60/40)
Special Order
T =Tape and Reel
7" [500] Reel
W = 13" [N/A] Reel
Note: Preferred Tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size
Voltage substitutions will be marked with the higher voltage rating
DIMENSIONS in inches [millimeters]
W
L
D
J
B
A
H
CASE CODE
L (MAX.)
W
H
E
0.287 ± 0.012
[7.3 ± 0.3]
0.173 ± 0.016
[4.4 ± 0.4]
0.157 ± 0.016
[4.0 ± 0.4]
F
0.287 ± 0.012
[7.3 ± 0.3]
0.238 ± 0.016
[6.0 ± 0.4]
0.187 ± 0.016
[4.7 ± 0.4]
R
0.287 ± 0.012 0.238 + 0.016/- 0.024 0.142 ± 0.016
[7.3 ± 0.3]
[6.0 + 0.4/- 0.6]
[3.6 ± 0.4]
V
0.287 ± 0.012
[7.3 ± 0.3]
0.173 ± 0.016
[4.4 ± 0.4]
0.079
[2.0] Max.
Z
0.287 ± 0.012
[7.3 ± 0.3]
0.238 ± 0.016
[6.0 ± 0.4]
0.238 ± 0.016
[6.0 ± 0.4]
Note: The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]
* Pb containing terminations are not RoHS compliant, exemptions may apply
A
0.051 ± 0.012
[1.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
B
0.180 ± 0.025
[4.6 ± 0.6]
0.180 ± 0.025
[4.6 ± 0.6]
0.180 ± 0.025
[4.6 ± 0.6]
0.180 ± 0.025
[4.6 ± 0.6]
0.180 ± 0.025
[4.6 ± 0.6]
D (REF.)
0.253
[6.4]
0.243
[6.2]
0.243
[6.2]
0.253
[6.4]
0.243
[6.2]
J (MAX.)
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
Document Number: 40047
Revision: 23-Jan-08
For technical questions, contact: [e-mail]
www.vishay.com
107