595D227X0010R2T Datasheet, PDF (1/10 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors TANTAMOUNT®, Conformal Coated, Maximum CV

www.vishay.com
595D
Vishay Sprague
Solid Tantalum Chip Capacitors TANTAMOUNT^®,
Conformal Coated, Maximum CV
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
FEATURES
• Large capacitance rating range
• Terminations: 100 % tin (2) standard tin/lead
available
• Mounting: Surface mount
• 8 mm, 12 mm tape and reel packaging available
per EIA 481 and reeling per IEC 60286-3.
7" [178 mm] standard. 13" [330 mm] available.
• Case code compatibility with EIA 535BAAC and CECC 30801
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
Capacitance Range: 0.1 μF to 1500 μF
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 4 V_DC to 50 V_DC
ORDERING INFORMATION
595D
106
X0
TYPE
CAPACITANCE
CAPACITANCE
TOLERANCE
010
DC VOLTAGE RATING
AT + 85 °C
A
CASE
CODE
2
TERMINATION
T
REEL SIZE AND
PACKAGING
This is expressed in pF.
The first two digits are
the significant figures.
The third is the number
of zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in V.
To complete the three-digit block,
zeros precede the voltage rating.
A decimal point is indicated by an
“R” (6R3 = 6.3 V).
See Ratings
and Case
Codes table
2 = 100 % tin
4 = Gold plated
8 = Solder
plated (60/40)
Special order
Tape and reel
T = 7"
[178 mm] reel
W = 13"
[330 mm] reel
Note
• Preferred tolerances and reel sizes are in bold.
We reserve the right to substitute form-fit-function replacement products with higher voltage rating, tighter capacitance tolerance, lower
ESR (e.g., 594D series), or increased reliability screening (T95 series).
DIMENSIONS in inches [millimeters]
L
MAX.
D
REF.
B
A
Tantalum wire
W
nib identifies
anode (+)
terminal
J
MAX.
J
MAX.
H
CASE CODE L MAX.
W
H
A
B
T
0.087
[2.2]
0.043 ± 0.012
[1.1 ± 0.3]
0.043 ± 0.012
[1.1 ± 0.3]
0.016 ± 0.008 0.042 ± 0.001
[0.4 ± 0.2]
[1.07 ± 0.25]
S
0.134
[3.4]
0.067 ± 0.008
[1.7 ± 0.2]
0.051 ± 0.008
[1.3 ± 0.3]
0.031 ± 0.012 0.079 ± 0.012
[0.8 ± 0.3]
[2.0 ± 0.3]
A
0.146
[3.7]
0.071 ± 0.012
[1.8 ± 0.3]
0.055 ± 0.012
[1.4 ± 0.3]
0.031 ± 0.012 0.087 ± 0.016
[0.8 ± 0.3]
[2.2 ± 0.4]
M
0.142
[3.6]
0.106 ± 0.012
[2.7 ± 0.3]
0.067 ± 0.012
[1.7 ± 0.3]
0.031 ± 0.012 0.079 ± 0.012
[0.8 ± 0.3]
[2.0 ± 0.3]
B
0.157
[4.0]
0.110 + 0.012/- 0.016
[2.8 + 0.3/- 0.4]
0.075 + 0.012/- 0.024
[1.9 + 0.3/- 0.6]
0.031 ± 0.012 0.098 ± 0.016
[0.8 ± 0.3]
[2.5 ± 0.4]
C
0.280
[7.1]
0.126 ± 0.012
[3.2 ± 0.3]
0.098 ± 0.012
[2.5 ± 0.3]
0.051 ± 0.012 0.181 ± 0.024
[1.3 ± 0.3]
[4.6 ± 0.6]
G
0.220
[5.6]
0.144 ± 0.016
[3.65 ± 0.4]
0.087
[2.2 max.]
0.051 ± 0.012 0.134 ± 0.016
[1.3 ± 0.3]
[3.4 ± 0.4]
D
0.295
[7.5]
0.169 + 0.012/- 0.024
[4.3 + 0.3/- 0.6]
0.110 ± 0.012
[2.8 ± 0.3]
0.051 ± 0.012 0.181 ± 0.024
[1.3 ± 0.3]
[4.6 ± 0.6]
R
0.283
[7.2]
0.236 + 0.012/- 0.024
[6.0 + 0.3/- 0.6]
0.138 + 0.012/- 0.016
[3.5 + 0.3/- 0.4]
0.051 ± 0.012 0.181 ± 0.024
[1.3 ± 0.3]
[4.6 ± 0.6]
Note
• The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]. T case = 0.005" [0.13 mm] minimum.
D REF.
0.063
[1.6]
0.087
[2.2]
0.115
[2.9]
0.253
[6.4]
0.138
[3.5]
0.236
[6.0]
0.236
[6.0]
0.252
[6.4]
0.244
[6.2]
J MAX.
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
Revision: 08-Jan-13
1
Document Number: 40007
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000