594D_08 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated, Maximum CV, Low ESR

594D
Vishay Sprague
Solid Tantalum Chip Capacitors
TANTAMOUNT^® Conformal Coated, Maximum CV, Low ESR
FEATURES
• Large capacitance rating range
• Lowest ESR for a surface mount tantalum chip
capacitor
• 100 % surge current conditioning for C, D and R
cases
• Terminations: Tin (2) standard
Pb-free
Available
RoHS*
COMPLIANT
• 8 mm, 12 mm tape and reel packaging available
per EIA 481-1 and reeling per IEC 286-3. 7" [178 mm]
standard. 13" [330 mm] available
• Case code compatibility with EIA 535BAAE and
CECC30801 molded chips
PERFORMANCE/ELECTRICAL CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Note: Refer to Doc. 40088
Capacitance Range: 1.0 µF to 1500 µF
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 4 WVDC to 50 WVDC
Equivalent Series Resistance: ESR readings measured at
100 kHz, + 25 °C from 3500 mΩ to 30 mΩ
ORDERING INFORMATION
594D
TYPE
477
CAPACITANCE
X0
CAPACITANCE
TOLERANCE
004
DC VOLTAGE RATING
AT + 85 °C
R
2
CASE CODE TERMINATION
T
PACKAGING
This is expressed in
picofarads. The first two
digits are the significant
figures. The third is the
number of zeros to
follow.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V).
See Ratings
and Case
Codes Table
2 = 100 % Tin
4 = Gold Plated
8 = Solder
Plated (60/40)
Special Order
T = Tape and Reel
7" [178 mm] Reel
W = 13" [330 mm] Reel
See Tape and Reel
Specifications.
Note:
Preferred Tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions
will be marked with the higher voltage rating.
DIMENSIONS in inches [millimeters]
W
L
MAX.
D
B
REF.
A
J
MAX.
Tantalum Wire
Nib Identifies
Anode (+)
Terminal
J
MAX.
CASE
CODE
B
L (MAX.)
0.158
[4.0]
W
H
0.110 + 0.012 - 0.016 0.075 + 0.012 - 0.024
[2.8 + 0.3 - 0.4]
[1.9 + 0.3 - 0.6]
A
0.031 ± 0.012
[0.80 ± 0.30]
C
0.281
[7.1]
0.126 ± 0.012
[3.2 ± 0.3]
0.098 ± 0.012
[2.5 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.30]
D
0.293
[7.5]
0.170 + 0.012/- 0.024
[4.3 + 0.3/- 0.6]
0.110 ± 0.012
[2.8 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.30]
R
0.283
[7.2]
0.235 + 0.012/- 0.024
[6.0 + 0.3/- 0.6]
0.136 ± 0.012
[3.5 ± 0.3]
0.051 ± 0.012
[1.3 ± .30]
Notes:
The anode termination (D less B) will be a minimum of 0.012" [0.3 mm].
* Pb containing terminations are not RoHS compliant, exemptions may apply
H
B
0.097 ± 0.016
[2.5 ± 0.4]
0.180 ± 0.024
[4.6 ± 0.6]
0.180 ± 0.024
[4.6 ± 0.6]
0.180 ± 0.024
[4.6 ± 0.6]
Document Number: 40006
Revision: 23-Jan-08
For technical questions, contact: [e-mail]
D (REF.)
0.138
[3.5]
0.236
[6.0]
0.253
[6.4]
0.243
[6.2]
J (MAX.)
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
www.vishay.com
85