594D686X0010C2T Datasheet, PDF (1/21 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors, TANTAMOUNT®, Conformal Coated, Maximum CV, Low ESR

www.vishay.com
594D
Vishay Sprague
Solid Tantalum Chip Capacitors, TANTAMOUNT^®,
Conformal Coated, Maximum CV, Low ESR
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 1.0 μF to 1500 μF
FEATURES
• Large capacitance rating range
• Mounting: Surface mount
• Lowest ESR for a surface mount tantalum chip
capacitor
Available
• Terminations: 100 % tin (2) standard; tin/lead Available
available
• 8 mm, 12 mm tape and reel packaging available per
EIA 481 and reeling per IEC 60286-3.
7" [178 mm] standard. 13" [330 mm] available.
• Case code compatibility with EIA 535BAAC and
CECC 30801
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 4 V_DC to 50 V_DC
Equivalent Series Resistance: ESR readings measured at
100 kHz, + 25 °C from 3500 m to 30 m
ORDERING INFORMATION
594D
477
X0
TYPE
CAPACITANCE CAPACITANCE
TOLERANCE
004
DC VOLTAGE RATING
AT + 85 °C
R
CASE
CODE
2
TERMINATION
T
REEL SIZE AND
PACKAGING
This is
expressed in pF.
The first two digits
are the significant
figures. The third
is the number
of zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in V.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V).
See Ratings
and Case
Code table
2 = 100 % tin
4 = Gold plated
8 = Solder plated
(60/40)
Special order
Tape and reel
T = 7" [178 mm] reel
W = 13" [330 mm] reel
Note
• Preferred tolerances and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
DIMENSIONS in inches [millimeters]
W
L
MAX.
D
B
REF.
A
CASE CODE
B
L_MAX.
0.157
[4.0]
W
0.110 + 0.012/- 0.016
[2.8 + 0.3/- 0.4]
H
0.075 + 0.012/- 0.024
[1.9 + 0.3/- 0.6]
C
0.280
[7.1]
0.126 ± 0.012
[3.2 ± 0.3]
0.098 ± 0.012
[2.5 ± 0.3]
D
0.295
[7.5]
0.169 + 0.012/- 0.024
[4.3 + 0.3/- 0.6]
0.110 ± 0.012
[2.8 ± 0.3]
R
0.283
[7.2]
0.236 + 0.012/- 0.024
[6.0 + 0.3/- 0.6]
0.138 + 0.012/- 0.016
[3.5 + 0.3/- 0.4]
Note
• The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]
J
MAX.
Tantalum wire
nib identifies
anode (+)
terminal
J
MAX.
H
A
0.031 ± 0.012
[0.8 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
B
0.098 ± 0.016
[2.5 ± 0.4]
0.181 ± 0.024
[4.6 ± 0.6]
0.181 ± 0.024
[4.6 ± 0.6]
0.181 ± 0.024
[4.6 ± 0.6]
D_REF.
0.138
[3.5]
0.236
[6.0]
0.252
[6.4]
0.244
[6.2]
J_MAX.
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
Revision: 25-Jun-13
1
Document Number: 40006
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000