534B1103JLB Datasheet, PDF (1/4 Pages) Vishay Siliconix – 7/8 (22.2 mm) Multi Turn Wirewound

www.vishay.com
Model 533, 534, 535
Vishay Spectrol
7_{/8" (22.2 mm) Multi Turn Wirewound}
533: 3 Turns/534: 10 Turns/535: 5 Turns
Note
• The color of this product may either be black (US market) or blue
(other regions)
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, multi turn wirewound
Output type
Output by turrets
Market appliance
Dimensions
Industrial
7_{/8" (22.2 mm)}
FEATURES
• Bushing and servo mount designs available
• Special resistance tolerances to 1 %
• Rear shaft extensions and support bearing
• Metric shaft available
• Dual gang configuration and concentric shafts
• High torque, center tap, slipping clutch on request
• Special markings and front shaft extensions
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
PARAMETER
Resistance range - standard values
Capability range
Standard tolerance
Linearity (independent)
Noise
Rotation (electrical and mechanical)
Power rating (at 70 °C)
Insulation resistance
Dielectric strength
Absolute minimum resistance
Temperature coefficient
End voltage
Phasing
Taps
MODEL 533
MODEL 534
MODEL 535
50  to 20 k
100  to 100 k
50  to 50 k
5  to 60 k
10  to 200 k
5  to 100 k
±5%
±5%
±5%
± 0.25 %
± 0.25 %
± 0.25 %
100  ENR
100  ENR
100  ENR
1080° + 10°
3600° + 10°
1800° + 10°
- 0°
- 0°
- 0°
1.0 W
2.0 w
1.5 W
1000 M minimum 500 V_DC
1000 V_RMS minimum 60 Hz
Not to exceed linearity x total resistance or 1 , whichever is greater
20 ppm/°C (standard values, wire only)
0.25 % of total applied voltage, maximum
CCW end points - section 2 phased to section 1 within ± 2°
Center tap only
MARKING
Unit identification
Manufacturer’s name and model number,
resistance value and tolerance, linearity
specification date code and terminal
identification
RESISTANCE VALUES
533 (
50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K
534 (
100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K
535 (
50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K
ORDERING INFORMATION/DESCRIPTION
The Models 533 (3 turns), 534 (10 turns) and 535 (5 turns) can be ordered by stating
534
B
2
10K
20K
5%
MODEL
MOUNTING
B: Bushing
S: Servo
NUMBER OF
SECTION
OHMIC VALUE
SECTION N^o 1
OHMIC VALUE TOLERANCE ON
SECTION N^o 2 OHMIC VALUE
C
BO10
LINEARITY PACKAGING
± 0.25 % (STD) Box of
10 pieces
e4
LEAD
FINISH
SAP PART NUMBERING GUIDELINES
534
B
2
103
MODEL
STYLE
NUMBER OF OHMIC VALUE
SECTION
SECTION N^o 1
B: Bushing
S: Servo
103 = 10K
203
OHMIC VALUE
SECTION N^o 2
203 = 20K
J
TOLERANCE ON
OHMIC VALUE
J: ± 5 %
F: ± 1 %
C
LINEARITY
C: ± 0.25 %
CUSTOM:
L: ± 0.20 %
D: ± 0.1 %
B10
PACKAGING
Box of
10 pieces
Revision: 27-Jun-12
1
Document Number: 57065
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000