516D Datasheet, PDF (1/7 Pages) Vishay Siliconix – Aluminum Capacitors + 85 °C, Miniature, Axial Lead

www.vishay.com
516D
Vishay Sprague
Aluminum Capacitors + 85 °C, Miniature, Axial Lead
FEATURES
• High CV per case size
• Low cost
• Solvent resistant construction (through 100 WV_DC)
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Nominal case size
Ø D x L in mm
0.197" x 0.472" [5.0 x 12.0]
to 0.709" x 1.614" [18.0 x 41.0]
Operating temperature
Rated capacitance range, C_R
Tolerance on C_R
Rated voltage range, U_R
Termination
- 40 °C to + 85 °C
(- 25 °C to + 85 °C for
315 WV_DC to 450 WV_DC units)
0.47 μF to 10 000 μF
± 20 %
6.3 WV_DC to 450 WV_DC
2 axial leads
Life validation test at 85 °C
2000 h: CAP  20 % from
initial measurement.
DF x 2 initial specified limit.
DCL  initial specified limit.
Shelf life at 85 °C
1000 h: CAP ± 20 % from
initial measurement.
DF 2 x initial specified limit.
DCL  the initial specified limit.
DC leakage current
Rated voltage for 1 min for
6.3 WV_DC to 100 WV_DC units
I < 0.03 CV or 4 μA
(whichever is greater)
Rated voltage for 2 min for
6.3 WV_DC to 100 WV_DC units
I < 0.01 CV or 3 μA
(whichever is greater)
Rated voltage for 1 min for
160 WV_DC to 450 WV_DC units
I < 0.1 CV + 40 μA and CV  1000
I < 0.04 CV + 100 μA and CV > 1000
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE
MULTIPLIERS
 + 70 °C
1.27
+ 85 °C
1.0
FREQUENCY (Hz)/CAPACITANCE (μF)
WV_DC
CAP. (μF)
50 TO 100 TO
60 120
300 TO
400
1 kHz
 10 kHz
0 to 47 0.75
1
1.35 1.57 2.00
6.3 to 100 to 470 0.80
1
100
1000 to
10 000
0.85
1
1.23 1.34 1.50
1.10 1.13 1.15
160 to
450
1 to 100
0.80
1
1.25 1.40 1.60
LOW TEMPERATURE PERFORMANCE
MAXIMUM IMPEDANCE RATIO Z^(T)/Z^{(+ 20 °C)} MAXIMUM AT 120 Hz
RATED VOLTAGE
(WV_DC)
6.3
10.0
16.0
25.0
35.0 to 100.0
160.0 to 250.0
315.0 to 350.0
400.0 to 450.0
Z - 25 °C/Z + 20 °C Z - 40 °C/Z + 20 °C
4.0
10.0
3.0
8.0
2.0
6.0
2.0
4.0
2.0
3.0
4.0
12.0
6.0
-
15.0
-
DIMENSIONS in inches [millimeters]
CASE NOMINAL CASE SIZE
LEAD TYPICAL WEIGHT CASE NOMINAL CASE SIZE
LEAD TYPICAL WEIGHT
CODE
DxL
DIAMETER
(g)
CODE
DxL
DIAMETER
(g)
JL 0.197 x 0.472 [5.0 x 12.0] 0.024 [0.6]
0.56
NR 0.394 x 1.023 [10.0 x 26.0] 0.024 [0.6]
3.10
LL 0.248 x 0.472 [6.3 x 12.0] 0.024 [0.6]
0.90
PR 0.512 x 1.023 [13.0 x 26.0] 0.024 [0.6]
4.63
LM 0.248 x 0.630 [6.3 x 16.0] 0.024 [0.6]
1.07
PS 0.512 x 1.240 [13.0 x 31.5] 0.024 [0.6]
5.47
MM 0.315 x 0.630 [8.0 x 16.0] 0.024 [0.6]
1.45
QS 0.630 x 1.240 [16.0 x 31.5] 0.031 [0.8]
8.26
MN 0.315 x 0.787 [8.0 x 20.0] 0.024 [0.6]
1.70
QT 0.630 x 1.633 [16.0 x 41.5] 0.031 [0.8]
10.42
NP 0.394 x 0.827 [10.0 x 21.0] 0.024 [0.6]
2.32
RT 0.709 x 1.614 [18.0 x 41.0] 0.031 [0.8]
12.42
Revision: 12-Apr-12
1
Document Number: 42046
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000