515D476M050AA6AE3 Datasheet, PDF (1/9 Pages) Vishay Siliconix – Aluminum Capacitors

www.vishay.com
515D
Vishay Sprague
Aluminum Capacitors
+ 85 °C, Miniature, Radial Lead
FEATURES
• High CV per case size
• Low cost
• Low profile ratings
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Nominal case size 
Ø D x L in mm
0.157" x 0.276" [4.0 x 7.0]
to 0.709" x 1.575" [18.0 x 40.0]
Operating temperature
Rated capacitance range, C_R
Tolerance on C_R
Rated voltage range, U_R
Termination
- 40 °C to + 85 °C
- 25 °C to + 85 °C for 315 WV_DC
to 450 WV_DC units
0.1 μF to 18 000 μF
± 20 %
6.3 WV_DC to 450 WV_DC
2 radial leads
Life validation test at 85 °C
2000 h: CAP ± 20 % from initial
measurement.
DF 2 x initial specified limit.
DCL  initial specified limit.
Shelf life at 85 °C
1000 h: CAP ± 20 % from initial
measurement.
DF 2 x initial specified limit.
DCL  initial specified limit.
DC leakage current
Rated voltage for 1 and 2 min for
6.3 WV_DC to 100 WV_DC units:
I < 0.03 CV or 4 μA
(whichever is greater).
I < 0.04 CV or 3 μA
(whichever is greater).
Rated voltage for 1 min for
160 WV_DC to 450 WV_DC units:
I < 0.1 CV + 40 μA and
CV  1000; I < 0.04 CV + 100 μA
and CV > 1000
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE
MULTIPLIERS
 + 70 °C
1.27
+ 85 °C
1.0
FREQUENCY (Hz)
WV_DC
CAP.
(μF)
50 TO
60
100 TO
120
300 TO
400
1 kHz  10 kHz
0 to 47
0.75 1
1.35 1.57 2.00
6.3 to 100 100 to 470 0.80 1
1.23 1.34 1.50
1000 to 18 000 0.85 1
1.10 1.13 1.15
160 to 450 0.47 to 220 0.80 1
1.25 1.40 1.60
LOW TEMPERATURE PERFORMANCE
MAXIMUM IMPEDANCE RATIO Z^(T)/Z^{(+ 20 °C)}
MAXIMUM AT 120 Hz
RATED VOLTAGE
(WV_DC)
6.3
Z - 25 °C/Z + 20 °C Z - 40 °C/Z + 20 °C
4.0
10.0
10.0
3.0
8.0
16.0
2.0
6.0
25.0
2.0
4.0
35.0 to 100.0
2.0
3.0
160.0 to 200.0
3.0
4.0
250.0
3.0
6.0
315.0 to 400.0
6.0
-
450.0
15.0
-
DIMENSIONS in inches [millimeters]
CASE
CODE
NOMINAL CASE SIZE
DxL
HW
0.157 x 0.276 [4.0 x 7.0]
JW
0.197 x 0.276 [5.0 x 7.0]
AW
0.248 x 0.276 [6.3 x 7.0]
JA
0.197 x 0.433 [5.0 x 11.0]
AA
0.248 x 0.433 [6.3 x 11.0]
BB
0.315 x 0.453 [8.0 x 11.5]
LEAD SPACING
S
0.059 [1.5]
0.079 [2.0]
0.098 [2.5]
0.079 [2.0]
0.098 [2.5]
0.138 [3.5]
NOMINAL LEAD DIAMETER
D
0.018 [0.45]
0.018 [0.45]
0.018 [0.45]
0.020 [0.50]
0.020 [0.50]
0.024 [0.60]
TYPICAL WEIGHT
(g)
0.20
0.30
0.40
0.44
0.60
0.95
Revision: 12-Jun-13
1
Document Number: 42052
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000