4N32_11 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Optocoupler, Photodarlington Output, High Gain With Base Connection

www.vishay.com
4N32, 4N33
Vishay Semiconductors
Optocoupler, Photodarlington Output, High Gain,
With Base Connection
i179005
A1
C2
NC 3
i179005_1
6B
5C
4E
DVE
DESCRIPTION
The 4N32 and 4N33 are optically coupled isolators with a
gallium arsenide infrared LED and a solicon photodarlington
sensor.
Switching can be achieved while maintaining a high degree
of isolation between driving and load circuits.
These optocouplers can be used to replace reed and
mercury relays with advantages of long life, high speed
switching and elimination of magnetic fields.
FEATURES
• Very high current transfer ratio, 500 % min.
• High isolation resistance, 10¹¹ Ω typical
• Standard plastic DIP package
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52744 system code H
• DIN EN 60747-5-2 (VDE 0884) / DIN EN 60747-5-5
(pending), available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO
ORDERING INFORMATION
4
N
3
#
-
PART NUMBER
X
0
#
#
T
PACKAGE OPTION
TAPE AND
REEL
DIP
7.62 mm
Option 7
Option 6
10.16 mm
Option 9
AGENCY CERTIFIED/PACKAGE
UL, BSI, FIMKO
≥ 500
DIP-6
4N32
DIP-6, 400 mil, option 6
SMD-6, option 7
SMD-6, option 9
4N32-X006
4N32-X007T ⁽¹⁾
4N32-X009T ⁽¹⁾
VDE, UL, BSI, FIMKO
≥ 500
DIP-6
4N32-X001
SMD-6, option 7
4N32-X017T
Notes
• Additional options may be possible, please contact sales office
(1) _{Also available in tubes, do not put T on the end}
CTR (%)
> 0.7 mm
> 0.1 mm
≥ 500
4N33
-
4N33-X007T ⁽¹⁾
4N33-X009T ⁽¹⁾
≥ 500
4N33-X001
4N33-X017T ⁽¹⁾
Rev. 1.2, 15-Feb-11
1
Document Number: 81865
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000