4N25-X Datasheet, PDF (1/7 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, with Base Connection

www.vishay.com
4N25-X, 4N26-X, 4N27-X, 4N28-X
Vishay Semiconductors
Optocoupler, Phototransistor Output, with Base Connection
A1
C2
NC 3
6B
5C
4E
i179004-14
DESCRIPTION
The 4N25 family is an Industry Standard Single Channel
Phototransistor Coupler. This family includes the 4N25, 4N26,
4N27, 4N28. Each optocoupler consists of gallium arsenide
infrared LED and a silicon NPN phototransistor.
These couplers are Underwriters Laboratories (UL) listed to
comply with a 5300 V_RMS isolation test voltage. This isolation
performance is accomplished through special Vishay
manufacturing process.
Compliance to DIN EN 60747-5-2 (VDE 0884)/
DIN EN 60747-5-5 pending partial discharge isolation
specification is available by ordering option 1.
These isolation processes and the Vishay ISO9001 quality
program results in the highest isolation performance available
for a commercial plastic phototransistor optocoupler.
The devices are also available in lead formed configuration
suitable for surface mounting and are available either on tape
and reel, or in standard tube shipping containers.
Note
• For additional design information see application note 45
normalized curves
FEATURES
• Isolation test voltage 5000 V_RMS
• Interfaces with common logic families
• Input-output coupling capacitance < 0.5 pF
• Industry standard dual-in-line 6-pin package
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• AC mains detection
• Reed relay driving
• Switch mode power supply feedback
• Telephone ring detection
• Logic ground isolation
• Logic coupling with high frequency noise rejection
AGENCY APPROVALS
• UL file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5
(pending), available with option 1
• BSI: EN 60065, EN 60950-1
• FIMKO
• CQC
ORDERING INFORMATION
4
N
2
x
-
X
0
#
#
T
DIP-6
Option 6
PART NUMBER
PACKAGE OPTION
TAPE
AND
REEL
7.62 mm
Option 7
10.16 mm
Option 9
AGENCY CERTIFIED/PACKAGE
UL, cUL, BSI, FIMKO
≥ 20
DIP-6
4N25-X000
DIP-6, 400 mil, option 6
4N25-X006
SMD-6, option 7
SMD-6, option 9
4N25-X007T
4N25-X009T ⁽¹⁾
VDE, UL, cUL, BSI, FIMKO
≥ 20
DIP-6
4N25-X001
DIP-6, 400 mil, option 6
SMD-6, option 7
4N25-X016
4N25-X017T ⁽¹⁾
Notes
• Additional options may be possible, please contact sales office.
(1) _{Also available in tubes; do not put T on end.}
CTR (%)
-
4N26-X006
-
4N26-X009T ⁽¹⁾
4N27-X000
-
4N27-X007
4N27-X009T ⁽¹⁾
4N26-X001
4N26-X016
4N26-X017T ⁽¹⁾
-
-
4N27-X017T
> 8 mm
8 mm typ.
≥ 10
≥ 10
-
-
-
4N28-X009T ⁽¹⁾
4N28-X001
-
-
Rev. 1.2, 16-Jan-12
1
Document Number: 81864
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000