430P Datasheet, PDF (1/3 Pages) Vishay Siliconix – Metalized Polyester Film Capacitors Wrap-and-Fill

Type 430P
Vishay Sprague
Metalized Polyester Film Capacitors
Wrap-and-Fill
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 85°C.
Capacitance Range: 0.0047µF to 10.0µF.
Capacitance Tolerance: ± 20%, ± 10%, ± 5%.
DC Voltage Rating: 50 WVDC to 600 WVDC.
Dissipation Factor: 1.0% maximum.
Voltage Test: 200% of rated voltage for 2 minutes.
Insulation Resistance:
At + 25°C: 25,000 Megohm - Microfarads or 50,000
Megohm minimum. At + 85°C: 1000 Megohm -
Microfarads or 2500 Megohm minimum.
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
FEATURES
• Economical
• Extensive standard ratings
• Rugged construction
• Small size
PHYSICAL CHARACTERISTICS
Lead Pull: 5 pounds (2.3 kilograms) for one minute.
No physical damage.
Lead Bend: After three complete consecutive bends,
no damage.
Marking: Sprague^® trademark, type or part number,
capacitance and voltage.
DC Life Test: 125% of rated voltage for 250 hours @ + 85°C.
No open or short circuits. No visible damage.
Maximum ∆ CAP = ± 10%.
Minimum IR = 50% of initial limit.
Maximum DF = 1.25%.
Humidity Test: 95% relative humidity @ + 40°C for 250
hours, no visible damage.
Maximum ∆ CAP ± 10%.
Minimum IR = 20% of initial limit.
Maximum DF = 2.0%.
DIMENSIONS in inches [millimeters]
1.750 [44.45]
Min.
L
+ 0.062 [1.57]
- 0.031 [0.79]
1.750 [44.45]
Min.
D
Max.
Solid Tinned Wire*
* Lead size: D Max. < 0.270 [6.86] 0.025 [0.64] (No. 22 AWG). D Max. ≥ 0.270 [6.86] 0.032 [0.81] (No. 20 AWG).
Leads to be within ± 0.062" [1.57mm] of center line at egress but not less than 0.031" [0.79mm] from edge.
STANDARD RATINGS in inches [millimeters]
CAPACITANCE
(µF)
PART NUMBER
± 10% TOLERANCE
± 5% TOLERANCE
50 WVDC
0.12
430P124X9050
430P124X5050
0.15
430P154X9050
430P154X5050
0.18
430P184X9050
430P184X5050
0.22
430P224X9050
430P224X5050
0.27
430P274X9050
430P274X5050
0.33
430P334X9050
430P334X5050
0.39
430P394X9050
430P394X5050
0.47
430P474X9050
430P474X5050
0.56
430P564X9050
430P564X5050
0.68
430P684X9050
430P684X5050
0.82
430P824X9050
430P824X5050
CASE SIZE
D
L
0.196 [4.98]
0.210 [5.33]
0.223 [5.66]
0.240 [6.10]
0.258 [6.55]
0.279 [7.09]
0.250 [6.35]
0.269 [6.83]
0.288 [7.32]
0.311 [7.90]
0.270 [6.86]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.625 [15.88]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
0.750 [19.05]
1.000 [25.40]
LEAD
AWG NO.
22
22
22
22
22
20
22
22
20
20
20
www.vishay.com
74
For technical questions, contact [e-mail]
Document Number: 42025
Revision 13-Nov-03