3KASMC13AHE3-57T Datasheet, PDF (1/5 Pages) Vishay Siliconix – Surface Mount PAR® Transient Voltage Suppressors

www.vishay.com
3KASMC10 thru 3KASMC43A
Vishay General Semiconductor
Surface Mount PAR^® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
DO-214AB (SMC)
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
• T_J = 185 °C capability suitable for high
reliability and automotive requirement
• Available in uni-directional polarity only
• 3000 W peak pulse power capability with a
10/1000 μs waveform
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
V_WM
10 V to 43 V
V_BR
11.1 V to 52.8 V
P_PPM
3000 W
P_D
6.0 W
I_FSM
200 A
T_J max.
185 °C
Polarity
Uni-directional
Package
DO-214AB (SMC)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: DO-214AB (SMC)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3 - RoHS-compliant and AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B, .....)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Peak pulse power dissipation with a 10/1000 μs waveform ⁽¹⁾ (fig. 3)
Peak power pulse current with a 10/1000 μs waveform ⁽¹⁾ (fig. 1)
Peak forward surge current 8.3 ms single half sine-wave ⁽²⁾
P_PPM
I_PPM
I_FSM
3000
See next table
200
Power dissipation on infinite heatsink, T_L = 75 °C (fig. 6)
Maximum instantaneous forward voltage at 100 A ⁽²⁾
Operating junction and storage temperature range
P_D
V_F
T_J, T_STG
6.0
3.5
- 65 to + 185
Notes
(1) _{Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2.}
(2) _{Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum}
UNIT
W
A
A
W
V
°C
Revision: 14-Dec-12
1
Document Number: 88480
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000