351HE Datasheet, PDF (1/5 Pages) Vishay Siliconix – Single Turn Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm)

www.vishay.com
Model 351 HE
Vishay Spectrol
Single Turn Bushing Mount Hall Effect
Sensor in Size 09 (22.2 mm)
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, single turn hall effect
Output type
Wires
Market appliance
Industrial
Dimensions
7/8" (22.2 mm)
FEATURES
• Accurate linearity down to: ± 0.5 %
• All electrical angles available up to: 360°
(no dead band)
• Long life: greater than 10M cycles
• Non contacting technology: Hall effect
• Model dedicated to all applications in harsh environments
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912

ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
SPECIAL
Electrical angle
Linearity
Supply voltage
Supply current
Output signal
Over voltage protection
Reverse voltage protection
Load resistance recommanded
Hysteresis
90°, 180°, 270°, 360°
Any other angle upon request
±1%
± 0.5 %
5 V_DC ± 10 %
Other upon request
10 mA typical
16 mA for PWM output
Analog ratiometric 10 % to 90 % of V_supply or
PWM 10 % to 90 % duty cycle
Other upon request
+20 V_DC
-10 V_DC
Min. 1 k for analog output and PWM output
< 0.35°
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
Bearing type
Standard
Weight
360° continuous, stops upon request: 340° ± 3°
Sleeve bearing
IP 50; other on request
20 g ± 2 g
ORDERING INFORMATION/DESCRIPTION
351HE
0
A
1
W
A
1S22
XXXX
BO 10
e1
MODEL
FEATURES LINEARITY
ELECTRICAL
ANGLE
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
PACKAGING
LEAD
FINISH
0: Continuous rotation
and antirotation pin
1: Continuous rotation
and no antirotation
pin
2: Stops at 330° and
antirotation pin
3: Stops at 330° and
no antirotation pin
A: ± 1 %
B: ± 0.5 %
1: 90°
2: 180°
3: 270°
4: 360°
9: Other
angles
W: Wires A: Analog CW 0: 6 mm
Z: Custom B: Analog CCW 1: 6.35 mm
C: PWM CW 2: 3.175 mm
D: PWM CCW 9: Special
Z: Other output P: Plain
S: Slotted
Z: Other type
Box of 10
pieces
Shaft length from mounting face 22 mm to 72 mm max. per step of 5 mm
SAP PART NUMBERING GUIDELINES
351HE
1
B
9
MODEL
MECHANICAL
FEATURES
LINEARITY
ELECTRICAL
TYPE
Z
OUTPUT
ANGLE
C
OUTPUT
SIGNAL
0P27
SHAFT TYPE
XXXX
SPECIAL
REQUEST
Revision: 27-Mar-15
1
Document Number: 57099
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000