232263323102 Datasheet, PDF (1/2 Pages) Vishay Siliconix – NTC Thermistors, Glass Encapsulated Miniature Bead

2322 633 2....
Vishay BCc
NTC Thermistors, Glass Encapsulated Miniature Bead
FEATURES
• Small diameter
• Quick response to changes in temperature
• Very high long term stability
• High temperature operation
• Resistant to agressive environments
QUICK REFERENCE DATA
PARAMETER
Resistance value at 25 °C
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
Maximum dissipation at 55 °C
Response time; note 1
Operating temperature range:
at zero dissipation
at maximum dissipation
Dielectric withstanding voltage (RMS)
between terminals and glass envelope
Insulation resistance between
terminals and glass envelope at 100 V
(DC)
Mass
VALUE
1 kΩ to 1 MΩ
±5%; ±10%
2075 to 4100 K
±5%
60 mW
≈6 s
−55 to +200 °C
0 to 55 °C
min. 1500 V
min. 100 MΩ
≈0.1 g
Note
1. Response time in silicone oil MS200/50. This is the time needed
for the sensor to reach 63.2% of the total temperature difference
when subjected to a temperature change from 25 °C in air to
85 °C in oil.
APPLICATIONS
Temperature measurement.
Bead thermistor with negative temperature coefficient, in a
glass envelope with two tinned durnet (CuNiFe) wires. The
device is non-flammable.
MARKING
The thermistors are marked with four coloured dots on the
glass envelope; see Component Outline drawing and
Electrical Data and Ordering Information table.
MOUNTING
By soldering in any position.
PACKAGING
The thermistors are packed in cardboard boxes; the smallest
packaging quantity is 100 units.
ELECTRICAL DATA AND ORDERING INFORMATION
R₂₅
(kΩ)
1
2.2
4.7
10
22
47
100
220
470
1 000
B_25/85-VALUE
2075 K ±5%
2285 K ±5%
2485 K ±5%
3750 K ±5%
3560 K ±5%
3750 K ±5%
3900 K ±5%
3860 K ±5%
3950 K ±5%
4100 K ±5%
TC
(%/K)
−2.3
−2.6
−2.8
−4.2
−4.0
−4.2
−4.4
−4.3
−4.5
−4.6
CATALOG NUMBER
2322 633 2....
R₂₅ ±5%
3102
3222
3472
3103
3223
3473
3104
3224
3474
3105
R₂₅ ±10%
2102
2222
2472
2103
2223
2473
2104
2224
2474
2105
COLOUR CODE
(see Component outline Drawing and note 1)
I
brown
red
yellow
brown
red
yellow
brown
red
yellow
brown
II
black
red
violet
black
red
violet
black
red
violet
black
III
red
red
red
orange
orange
orange
yellow
yellow
yellow
green
Note
1. Dependent upon R₂₅-tolerance, the dot IV is coloured as follows:
a) for R₂₅ ±5%, dot IV is coloured gold;
b) for R₂₅ ±10%, dot IV is coloured silver.
2. R₂₅-values, temperature coefficients, catalog numbers and coding.
3. The thermisters have a 12-digit catalog number starting with 2322 633 2. The subsequent 4 digits indicate the resistance value and tolerance.
Document Number: 29064
Revision: 08-May-03
For technical questions contact: [e-mail]
www.vishay.com
1