200D_05 Datasheet, PDF (1/11 Pages) Vishay Siliconix – Wet Tantalum Capacitors Wet Sintered Anode TANTALEX® ComponentsTANTAPAK® Capacitor Assemblies

200D, 202D
Vishay
Wet Tantalum Capacitors
Wet Sintered Anode TANTALEX^® Components
TANTAPAK^® Capacitor Assemblies
FEATURES
TANTAPAK^® Wet Sintered Anode capacitor assemblies are
widely used in filter, coupling, bypass and time-delay circuits
in computers, missiles, airborne equipment, radar and fire
control systems.
TANTAPAK^® capacitor assemblies are available in 3 standard
case styles and 13 case codes. Type 200D units are
constructed with the negative terminal connected to the
case; they are available only in the “A” case, in five case
codes. Model 202D capacitors are the commercial
equivalent of Tansitor Style RW, Mallory-NACC Style TL and
are designed to meet MIL-DTL-3965 and DSCC DWG
04021.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C.
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %
standard. ± 10 % available.
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings Tables.
Life Test: Capacitors shall withstand 2000 hours at a
temperature of + 85 °C or + 125 °C at the rated DC working
voltage.
Following the life test:
1. DCL shall not exceed the original requirement.
2. ESR shall not be more than 130 % of the initial
requirement.
3. Capacitance shall not change more than ± 25 %.
ORDERING INFORMATION
202D
MODEL
318
CAPACITANCE
X0
CAPACITANCE
TOLERANCE
006
DC VOLTAGE RATING
AT + 85 °C
A1
CASE CODE
200D = Negative terminal connected to case
(Available only in 'A' Cases)
202D = Both terminals insulated from case
This is expressed in picofarads.
The first two digits are the
significant figures. The third is
the number of zeros to follow
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating
See
Dimensional
Configurations
DIMENSIONS in inches [millimeters]
1.305 ± 0.031
[33.15 ± 0.79]
SERIES “A” CASE
90° ± 1°
CL
90° ± 1°
0.625± 0.015
[15.88± 0.38]
0.067 [1.70]
DIA. HOLE
0.203± 0.031
[5.16 ± 0.79]
0.625 ± 0.015
[15.88 ± 0.38]
CL
MODEL 200D
0.720 ± 0.031
[18.29 ± 0.79]
0.625 ± 0.015
[15.88 ± 0.38]
0.062 x 0.125
[1.57 x 3.18]
HOLE
0.266 ± 0.031
[6.76 ± 0.79]
CL
H ± 0.031
[0.79]
1.275 ± 0.015
[32.39 ± 0.38]
MODEL 202D
Series “B” Case
CL
1.000 ± 0.062
[25.4 ± 1.57]
0.062 x 0.125
[1.57 x 3.18]
Hole
0.750 ± 0.015
[19.05 ± 0.38]
0.281 ± 0.031
[7.14 ± 0.79]
CL
H ± 0.062
[1.57]
1.593 ± 0.062
[40.46 ± 1.57]
www.vishay.com
104
For technical questions, contact: [e-mail]
Document Number: 40027
Revision: 14-Oct-05