1N6386 Datasheet, PDF (1/5 Pages) Vishay Siliconix – TRANSZORB® Transient Voltage Suppressors

ICTE5.0 thru ICTE18C, 1N6373 thru 1N6386
Vishay General Semiconductor
TRANSZORB^® Transient Voltage Suppressors
Case Style 1.5KE
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 1500 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
V_WM
P_PPM
P_D
I_FSM
T_J max.
5.0 V to 18 V
1500 W
6.5 W
200 A
175 °C
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use C suffix (e.g. ICTE-18C).
Electrical characteristics apply in both directions.
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of sensor
units for consumer, computer, industrial and
telecommunication.
MECHANICAL DATA
Case: Molded epoxy body over passivated junction
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the color band
denotes cathode end, no marking on bi-directional
types
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 µs waveform ⁽¹⁾ (Fig. 1)
Peak pulse current with a 10/1000 µs waveform ⁽¹⁾ (Fig. 3)
Power dissipation on infinite heatsink at T_L = 75 °C (Fig. 8)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only ⁽²⁾
Maximum instantaneous forward voltage at 100 A for uni-directional only
Operating junction and storage temperature range
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A = 25 °C per Fig. 2
(2) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minute maximum
SYMBOL
P_PPM
I_PPM
P_D
I_FSM
V_F
T_J, T_STG
LIMIT
1500
See next table
6.5
200
3.5
- 55 to + 175
UNIT
W
A
W
A
V
°C
Document Number: 88356 For technical questions within your region, please contact one of the following:
Revision: 21-Oct-08
[e-mail], [e-mail], [e-mail]
www.vishay.com
1