|
1N400XGP-M3 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Glass Passivated Junction Plastic Rectifier | |||
|
www.vishay.com
1N400xGP-M3, 1N400xGPHM3
Vishay General Semiconductor
Glass Passivated Junction Plastic Rectifier
SUPERECTIFIER®
DO-204AL (DO-41)
PRIMARY CHARACTERISTICS
Package
DO-204AL (DO-41)
IF(AV)
VRRM
IFSM (8.3 ms sine-wave)
IFSM (square wave tp = 1 ms)
IR
VF
TJ max.
Diode variations
1.0 A
50 V to 1000 V
30 A
45 A
5.0 μA
1.1 V
175 °C
Single die
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes for both
consumer, and automotive applications.
FEATURES
⢠Superectifier structure for high reliability
application
⢠Cavity-free glass-passivated junction
⢠Low forward voltage drop
⢠Low leakage current, typical IR less than 0.1 μA
⢠High forward surge capability
⢠Solder dip 275 °C max. 10 s, per JESD 22-B106
⢠AEC-Q101 qualified
⢠Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Case: DO-204AL (DO-41), molded epoxy over glass bodyï
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial gradeï
Base P/NHM3 - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102ï
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
Note
⢠For part numbers with âEâ suffix, they areâ-M3â commercial
grade only
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT
Maximum repetitive peakï
reverse voltage
VRRM
50
Maximum RMS voltage
VRMS (1)
35
Maximum DC blocking voltage
VDC (1)
50
Maximum average forward rectifiedï
current 0.375" (9.5 mm) lead lengthï IF(AV) (1)
at TA = 75 °C
Peak forward surge current 8.3 ms
single half sine-wave
superimposed on rated load
IFSM (1)
100
200
400
600
800
1000
V
70
140
280
420
560
700
V
100
200
400
600
800
1000
V
1.0
A
30
A
Non-repetitive peakï
forward surge currentï
square waveformï
TA = 25 °C (fig. 3)
tp = 1 ms
tp = 2 ms
tp = 5 ms
Maximum full load reverse current,ï
full cycle average 0.375" (9.5 mm)ï
lead length TA = 75 °C
Rating for fusing (t < 8.3 ms)
IFSM (1)
IR(AV) (1)
I2t (2)
45
35
A
30
30
μA
3.7
A2s
Operating junction andï
storage temperature range
TJ, TSTG (1)
- 65 to + 175
°C
Notes
(1) JEDEC® registered values
(2) For device using on bridge rectifier application
Revision: 04-Dec-13
1
Document Number: 87902
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |