199D686X9025F6V1 Datasheet, PDF (1/7 Pages) Vishay Siliconix – Solid-Electrolyte TANTALEX Capacitors

www.vishay.com
199D
Vishay Sprague
Solid-Electrolyte TANTALEX^® Capacitors,
Resin-Coated, Radial-Lead
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(to + 125 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C, ± 20 %,
± 10 % standard. ± 5 % available as special
Dissipation Factor: At 120 Hz, + 25 °C. Dissipation factor,
shall not exceed the values listed in the Standard Ratings
tables.
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings tables.
FEATURES
• Terminations: Tin/lead (SnPb), 100 % tin (Sn)
• Economy and high performance are combined
in these radial-lead, solid-electrolyte TANTALEX^®
capacitors
• Rugged, reliable capacitors featuring low
leakage current and low dissipation factor
• Six miniature case sizes and five lead styles. All case sizes
are available in standard tape and reel packaging per
EIA-468
• Standard ratings include replacements for Type 196D
capacitors
• Lead (Pb)-free capacitors have “L” in body marking
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
APPLICATIONS
Suitable for a broad range of consumer, commercial and
industrial equipment
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings tables.
At + 125 °C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings tables.
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 1000 h with a circuit resistance not
greater than 3 .
Following the life test:
1. DCL shall not exceed 125 % of the initial requirements
2. Dissipation Factor shall meet the initial requirement
3. Change in capacitance shall not exceed ± 10 %
LEAD STYLE CONFIGURATIONS AND DIMENSIONS** (LL = Lead Length)
“LONG/SHORT” LL
1, 3 and Y
EVEN LL
2, 4 and 5
“OUTSIDE HOCKEYSTICK”
6 and 7
“SNAP- IN”
9
D
D
D
D
H
+
+
H
+
+
L
L
P
P
(1) - WIRE DIAMETER (NOMINAL) 0.020" [0.51 mm]
+
+
H₁
L
P
+
+H
1.1 ± 0.05
L
P
“HAIRPIN” X, Z
6.35 max.
D
H
H₁
L
P
AVAILABLE LEAD STYLES AND PACKAGING TYPES PER CASE SIZE
LEAD STYLE/CASE 1
2
3
4
5
6
7
9
X
Y
Z
A
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
B
V1
Bulk Reel
V1
Reel
Bulk
V1
Reel
V1
Reel
V1
V1
Reel Bulk Reel
C
V1
B1
Ammo
B1
Ammo
V1
Reel
B1
B1
B1
V1
B1
Ammo Ammo Ammo
Ammo
D
A1
A1
B1
A1
A1
A1
A1
Ammo
E
Bulk Bulk/Reel
A1
F
V1
Ammo
Revision: 29-Nov-12
1
Document Number: 40020
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000