195D_08 Datasheet, PDF (1/9 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated

195D
Vishay Sprague
Solid Tantalum Chip Capacitors
TANTAMOUNT^® Conformal Coated
FEATURES
• 8 mm, 12 mm tape packaging to EIA-481-1
reeling per IEC 286-3. 7’ (178 mm) standard 13"
(330 mm) available
• US and European case sizes available
Pb-free
Available
RoHS*
COMPLIANT
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Note: Refer to Doc 40088
Capacitance Range: 0.1 µF to 330 µF
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 2 WVDC to 50 WVDC
ORDERING INFORMATION
195D
TYPE
106
CAPACITANCE
X0
CAPACITANCE
TOLERANCE
004
DC VOLTAGE RATING
AT + 85 °C
S
2
CASE CODE TERMINATION
T
PACKAGING
This is expressed in
picofarads. The first two
digits are the significant
figures. The third is the
number of zeros to
follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
(Special Order)
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V).
See Ratings
and Case
Codes Table
Style 2 is
standard
2 = 100 % Tin
4 = Gold Plated
8 = Solder
Plated (60/40)
Special Order
Note: Preferred Tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same
case size. Voltage substitutions will be marked with the higher voltage rating.
T = Tape and Reel
7" [178 mm] Reel
standard
1/2" Reel minimum
13" [330] Reel
available excluding
the “R” case, on
request.
See Tape and Reel
Specifications.
DIMENSIONS in inches [millimeters]
W
L
MAX.
D
B
REF.
A
J
MAX.
Tantalum Wire
Nib Identifies
Anode (+)
Terminal
J
MAX.
CASE
CODE
C
EIA
SIZE
N/A
R 7257
S 3518
V 3527
X 7227
Y 7227
Z 7227
L (MAX.)
0.087
[2.21]
0.283
[7.2]
0.143
[3.63]
0.143
[3.63]
0.285
[7.24]
0.285
[7.24]
0.285
[7.24]
W
0.045 ± 0.010 [1.14 ± 0.25]
0.235 + 0.012/- 0.024
[6.0 + 0.3/- 0.6]
0.072 ± 0.008 [1.83 ± 0.20]
0.104 ± 0.010 [2.65 ± 0.25]
0.104 ± 0.010 [2.65 ± 0.25]
0.104 ± 0.010 [2.65 ± 0.25]
0.104 ± 0.010 [2.65 ± 0.25]
H
0.045 ± 0.010
[1.14 ± 0.25]
0.136 ± 0.012
[3.5 ± 0.3]
0.048 ± 0.008
[1.22 ± 0.20]
0.051 ± 0.010
[1.30 ± 0.25]
0.051 ± 0.010
[1.30 ± 0.25]
0.069 ± 0.010
[1.75 ± 0.25]
0.104 ± 0.010
[2.65 ± 0.25]
A
0.016 ± 0.008
[0.40 ± 0.20]
0.051 ± 0.012
[1.3 ± 0.3]
0.023 ± 0.010
[0.58 ± 0.25]
0.023 ± 0.010
[0.58 ± 0.25]
0.040 ± 0.020
[1.00 ± 0.50]
0.040 ± 0.020
[1.00 ± 0.50]
0.040 ± 0.020
[1.00 ± 0.50]
H
B
0.042 ± 0.010
[1.07 ± 0.25]
0.180 ± 0.025
[4.6 ± 0.6]
0.085 ± 0.015
[2.16 ± 0.37]
0.085 ± 0.015
[2.16 ± 0.37]
0.200 ± 0.027
[5.08 ± 0.69]
0.200 ± 0.027
[5.08 ± 0.69]
0.200 ± 0.023
[5.08 ± 0.59]
Note: The anode termination (D less B) will be a minimum of 0.010 (0.25), C Case = 0.005 (0.131) minimum
* Pb containing terminations are not RoHS compliant, exemptions may apply
D (REF.) J (MAX.)
0.063
[1.60]
0.243
[6.20]
0.115
[2.90]
0.115
[2.90]
0.243
[6.20]
0.243
[6.20]
0.243
[6.20]
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
0.004
[0.10]
www.vishay.com
110
For technical questions, contact: [e-mail]
Document Number: 40011
Revision: 05-May-08