195D226X0035R2T Datasheet, PDF (1/11 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors TANTAMOUNT®, Conformal Coated

www.vishay.com
195D
Vishay Sprague
Solid Tantalum Chip Capacitors
TANTAMOUNT^®, Conformal Coated
FEATURES
• 8 mm, 12 mm tape packaging to EIA-481
reeling per IEC 60286-3.
7" (178 mm) standard 13" (330 mm) available
• US and European case sizes available
• Mounting: Surface mount
• Terminations: 100 % tin (2) standard, tin/lead available
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
PERFORMANCE/ELECTRICAL CHARACTERISTICS
www.vishay.com/doc?40088
Capacitance Range: 0.1 μF to 330 μF
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 2 V_DC to 50 V_DC
ORDERING INFORMATION
195D
106
X0
TYPE
CAPACITANCE
CAPACITANCE
TOLERANCE
004
DC VOLTAGE
RATING AT + 85 °C
S
CASE CODE
2
TERMINATION
T
PACKAGING
This is expressed
in picofarads.
The first two digits
are the significant
figures. The third
is the number of
zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
(Special order)
This is expressed in
volts. To complete
the three-digit
block, zeros
precede the voltage
rating. A decimal
point is indicated by
an “R” (6R3 = 6.3 V).
See Ratings
and Case
Codes table
Style 2 is standard
2 = 100 % tin
4 = Gold plated
8 = Solder plated
(60/40)
Special order
T = Tape and reel
7" [178 mm] reel
standard.
For H case size
lengthwise
W = Tape and reel
13" [330 mm] reel
available
See Standard Packaging
Quantity table
Note
• Preferred tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Revision: 08-Feb-13
1
Document Number: 40001
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000