1840310-4 Datasheet, PDF (1/4 Pages) Vishay Siliconix – AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type

MKP 1840
Vishay Roederstein
AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
Dimensions in millimeters
l
max.
w
max.
Marking
h
max.
0.6
Pitch
± 0.4
6-1
± 0.4
Ø 0.8
LEAD DIAMETER
d_t (mm)
0.5
0.6
0.8
1.0
W
(mm)
-
-
< 16
≥ 16.5
PITCH
(mm)
5
7.5/10
15 to 37.5
15 to 37.5
MAIN APPLICATIONS
Pulse operations, deflection circuits in TV-sets
(S-correction), SMPS and thyristor circuits, storage, filter,
timing, sample and hold circuits.
DIELECTRIC
Polypropylene film
ELECTRODES
Metallized
COATING
Flame retardant plastic case (class UL 94 V0), epoxy resin
sealed.
CONSTRUCTION
Extended metallized film (refer to General Information)
LEADS
Tinned wire
IEC TEST CLASSIFICATION
55/100/56, according to IEC 60068
OPERATING TEMPERATURE RANGE
- 55 °C to + 100 °C
CAPACITANCE RANGE
4700 pF to 10 µF
FEATURES
• Compliant to RoHS Directive 2002/95/EC
CAPACITANCE TOLERANCES
± 20 % (M), ± 10 % (K), ± 5 % (J)
RATED VOLTAGES (U_R)
100 V_DC,160 V_DC, 250 V_DC, 400 V_DC, 630 V_DC
INSULATION RESISTANCE
Measured at 100 V_DC after one minute
For C ≤ 0.33 µF:
25 000 MΩ (U_R 100 V_DC)
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60 Hz
63 V_AC, 100 V_AC, 160 V_AC, 220 V_AC, 250 V_AC
TEST VOLTAGE (ELECTRODE/ELECTRODE)
1.6 x U_R for 2 s
TIME CONSTANT
Measured at 100 V_DC after one minute
For C > 0.33 µF:
30 000 s minimum value
TEMPERATURE COEFFICIENT
- 250 x 10^-6/°C (typical value)
CAPACITANCE DRIFT
Up to + 40 °C, < 0.5 % for a period of two years
DIELECTRIC ABSORPTION
0.05 % (typical value) according to IEC 60068-2-21
DERATING FOR DC AND AC CATEGORY
VOLTAGE U_C
At + 85 °C: U_C = 1.0 U_R
At + 100 °C: U_C = 0.7 U_R
SELF INDUCTANCE
~ 6 nH measured with 2 mm long leads
PULL TEST ON LEADS
≥ 30 N in direction of leads according to IEC 60068-2-21
For further details, please refer to the general information
available at www.vishay.com/doc?26033.
MAXIMUM PULSE RISE TIME
PCM
(mm)
5
100 V_DC
390
Maximum Pulse Rise Time dV/dt [V/µs]
160 V_DC
250 V_DC
400 V_DC
-
-
-
7.5
-
240
300
-
10
-
175
20
-
15
-
100
125
200
22.5
-
60
75
120
27.5
-
45
60
95
37.5
-
30
40
65
Note
• If the maximum pulse voltage is less than the rated voltage higher dV/dt values can be permitted.
630 V_DC
-
-
510
280
160
120
85
Document Number: 26061
Revision: 30-Nov-10
For technical questions, contact: [e-mail]
www.vishay.com
147