173D107X9020YWE3 Datasheet, PDF (1/10 Pages) Vishay Siliconix – Solid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case

www.vishay.com
173D
Vishay Sprague
Solid-Electrolyte TANTALEX^® Capacitors,
Axial-Leaded, Molded Case
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(to + 125 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C.
± 20 %, ± 10 % standard ± 5 % available as special
Capacitance Range: 0.10μF to 330 μF.
Voltage Rating: 2 V_DC to 50 V_DC.
Dissipation Factor: At 120 Hz, + 25 °C. Dissipation factor,
as determined from the expression 2fRC, shall not exceed
the values listed in the Standard Ratings table.
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings table.
FEATURES
• Axial through-hole terminations: Tin/lead
(SnPb), 100 % tin (RoHS-compliant)
• Miniature axial-lead capacitors available in 5
sizes
• Precision molded in gold colored, flame
retardant, thermosetting epoxy resin
• Laser marked for improved legibility and
tapered end of case provides easy identification of
positive terminal
• Standard orders are lead taped and reeled; orders under
500 are taped only
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
APPLICATIONS
Designed for high performance automotive, industrial and
commercial electronic equipment.
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings table.
At + 125 °C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings table.
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 2000 h and for 1000 h applied
at + 25 °C derated voltage.
Following the life test:
1. DCL shall not exceed 125 % of the initial requirements.
2. Dissipation Factor shall meet the initial requirement.
3. Change in capacitance shall not exceed ± 10 %.
ORDERING INFORMATION
173D
MODEL
335
CAPACITANCE
X9
CAPACITANCE
TOLERANCE
006
DC VOLTAGE RATING
AT + 85 °C
U
CASE
CODE
W
PACKAGING
E3
RoHS
COMPLIANT
This is expressed in picofarads.
The first two digits are the
significant figures. The third is
the number of zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
*X5 = ± 5 %
* Special order
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating.
See
Ratings
and Case
Codes
table
W = Tape
and reel
Blank = Ammo
pack
E3 = 100 %
tin termination
(RoHS
compliant)
Blank = SnPb
termination
DIMENSIONS in inches [millimeters]
0.875 [22.23]
Min.
(-)
L
Max.
0.875 [22.23]
Min.
(+)
CASE CODE
U
V
W
X
Y
Tinned solid leads
D (MAX.)
0.095 [2.41]
0.110 [2.79]
0.180 [4.57]
0.180 [4.57]
0.280 [7.11]
Tapered end identifies anode
L (MAX.)
0.260 [6.60]
0.290 [7.37]
0.345 [8.76]
0.420 [10.67]
0.550 [13.97]
D
Max.
LEAD DIAMETER
0.020 [0.51]
0.020 [0.51]
0.020 [0.51]
0.020 [0.51]
0.025 [0.64]
Revision: 05-Apr-12
1
Document Number: 40019
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000