173D Datasheet, PDF (1/6 Pages) Vishay Siliconix – Solid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded-Case

173D
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors,
Axial-Leaded, Molded-Case
FEATURES
• Miniature axial-lead capacitors available in 5 sizes
• Precision molded in gold colored, flame retardant, thermo-
setting epoxy resin
• Laser marked for improved legibility and tapered end of
case provides easy identification of positive terminal
• Standard orders are lead taped and reeled; orders under
500 are taped only.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 85°C. (To + 125°C
with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25°C. ± 20%, ±10%
standard. ± 5% available as special.
Dissipation Factor: At 120 Hz, + 25°C. Dissipation factor,
as determined from the expression 2πfRC, shall not exceed
the values listed in the Standard Ratings Tables.
DC Leakage Current (DCL Max.):
At + 25°C: Leakage current shall not exceed the values
listed in the Standard Ratings Tables.
At + 85°C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
ORDERING INFORMATION
173D
MODEL
335
CAPACITANCE
This is expressed in picofarads. The
first two digits are the significant
figures. The third is the number of
zeros to follow.
X9
CAPACITANCE
TOLERANCE
X0 = ± 20%
X9 = ±10%
*X5 = ± 5%
*Special order
APPLICATIONS
• Designed for high performance automotive, industrial and
commercial electronic equipment
At + 125°C: Leakage current shall not exceed 15 times
the values listed in the Standard Ratings Tables.
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85°C for 2000 hours and for 1000 hours applied
at + 125°C derated voltage.
Following the life test:
1. DCL shall not exceed 125% of the initial requirement.
2. Dissipation Factor shall meet the initial requirement.
3. Change in capacitance shall not exceed ± 10%.
006
DC VOLTAGE RATING
AT + 85°C
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating.
U
CASE
CODE
See Ratings
and Case
Codes
Table.
W
PACKAGING
W = Tape and
reel.
DIMENSIONS in inches [millimeters]
0.875 [22.23]
Min.
(-)
L
Max.
0.875 [22.23]
Min.
(+)
D
Max.
CASE
CODE
U
V
W
X
Y
Document Number: 40019
Revision 13-Jun-02
Tinned Solid
Leads
D
(MAX.)
0.095 [2.41]
0.110 [2.79]
0.180 [4.57]
0.180 [4.57]
0.280 [7.11]
Tapered End
Identifies Anode
L
(MAX.)
0.260 [6.60]
0.290 [7.37]
0.345 [8.76]
0.420 [10.67]
0.550 [13.97]
For technical questions, contact [e-mail]
LEAD
DIAMETER
0.020 [0.51]
0.020 [0.51]
0.020 [0.51]
0.020 [0.51]
0.025 [0.64]
www.vishay.com
87