16LH_08 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder

Series REC 16 LH
Vishay Sfernice
Precision Linear Transducers, Designed for Mounting in Hydraulic
or Pneumatic Cylinder, Conductive Plastic Element
(Unsealed Series/Ø 16 mm)
FEATURES
• Large range of strokes from 25 to 2000 mm
• High accuracy
• Very good repeatability
RoHS
COMPLIANT
• Continuous resolution
• Easy mounting
These unsealed sensors are suitable for installation in the
high pressure chamber of cylinders.
ELECTRICAL SPECIFICATIONS
Theoretical Electrical Travel (TET) = E
Independent Linearity (over TET)
On Request
Actual Electrical Travel (AET)
Total Resistance R_T
Resistance Tolerance at 20 °C
Repeatability
Maximum Power Rating
Wiper Current
Load Impedance
Insulation Resistance
Dielectric Strength
From 25 mm to 2000 mm in increments of 25 mm
≤ ± 1 %; ≤ ± 0.1 %
≤ ± 0.05 % if E ≥ 100 mm, ≤ ± 0.025 % if E ≥ 200 mm
TET + 6 mm ± 0.5
150 Ω/cm
± 20 %
≤ 0.01 %
0.05 W/cm at 70 °C, 0 W at 125 °C
Recommended: a few µA - 1 mA max. (continuous)
1000 times R_T minimum
> 1000 MΩ, 500 V_DC
> 300 V_RMS at 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical Travel (MT)
Body
Rod Internal Diameter
Support
Operating Force
Electrical Outputs
Oil
Pressure
Wiper
MT = TET
Anodized aluminum
16 LH: Ø 18 mm
2 screws
1 N typical
Wires 300 mm long
Insulating mineral hydraulic
300 bars continuous, 1000 bars accidentally
Precious metal multifinger
PERFORMANCE
Life
Temperature Limits
Speed at 20 °C
25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET
- 20 °C to + 80 °C
1.5 m/s max.
Document Number: 54016
Revision: 01-Feb-08
For technical questions, contact: [e-mail]
www.vishay.com
59