16LH Datasheet, PDF (1/3 Pages) Vishay Siliconix – Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element (REC)

16 LH
Vishay
Precision Linear Transducers,
Designed for Mounting in Hydraulic or Pneumatic Cylinder,
Conductive Plastic Element (REC)
FEATURES
∑ Large Range of Strokes from 25 to 2000 mm
∑ High Accuracy
∑ Very Good Repeatability
∑ Continuous Resolution
∑ Easy Mounting
These unsealed sensors are suitable for installation in the
high pressure chamber of cylinders.
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET = E)
Independent linearity over TET
on request
Actual electrical travel (AET)
Total resistance RT
Resistance tolerance at 20°C
Repeatability
Maximum power rating
Wiper current
Load impedance
Insulation resistance
Dielectric strength
MECHANICAL SPECIFICATIONS
Mechanical travel MT
Body
Rod internal diameter
Support
Operating force
Electrical outputs
Oil
Pressure
Wiper
from 25mm to 2000mm in increments of 25mm
£ ± 1%; £ ± 0.1%
£ ± 0.05% if E ≥ 100mm, £ ± 0.025% if E ≥ 200mm
TET + 6mm ± 0.5
150W/cm
± 20%
£ 0.01%
0.05W/cm at 70°C, 0W at 125°C
1mA max. continuous, recommended: a few µA
1000 times RT minimum
> 1000MW 500VDC
> 300VRMS at 50Hz
MT = TET
anodized aluminum
16 LH : ø 18mm
2 screws
1N typical
wires 300mm long
insulating mineral hydraulic
300 bars continuous, 1000 bars accidentally
precious metal multifinger
PERFORMANCE
Life
Temperature limits
Speed at 20°C
Document Number: 54016
Revision: 08-Jan-04
40 million of cycles
– 20°C to + 80°C
1.5m/s max.
For technical questions, contact: [e-mail]
www.vishay.com
39