English
Language : 

151HE_15 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Industrial Servo Mount Hall Effect Sensor in Size 09 (22.2 mm)
www.vishay.com
Model 151 HE
Vishay Spectrol
Industrial Servo Mount Hall Effect
Sensor in Size 09 (22.2 mm)
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, single turn hall effect
Output type
Output by turrets
Market appliance
Industrial
Dimensions
7/8" (22.2 mm)
FEATURES
• Accurate linearity down to: ± 0.5 %
• All electrical angles available up to: 360°
(no dead band)
• Long life: greater than 10M cycles
• Non contacting technology: Hall effect
• Model dedicated to all applications in harsh environments
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912

ELECTRICAL SPECIFICATIONS
PARAMETER
STANDARD
SPECIAL
Electrical angle
90°, 180°, 270°, 360°
Any other angle upon request
Linearity
±1%
± 0.5 %
Supply voltage
Supply current
5 VDC ± 10 %
10 mA typical/16 mA max.
Other upon request
16 mA for PWM output
Output signal
Analog ratiometric 10 % to 90 % of Vsupply or
PWM 1 kHz, 10 % to 90 % duty cycle
Other upon request
Over voltage protection
Reverse voltage protection
Load resistance recommended
+20 VDC
-10 VDC
Min. 1 k for analog output and PWM output
Hysteresis static
< 0.2°
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
Bearing type
Standard
360° continuous
2 ball bearings
IP 50; other on request
ORDERING INFORMATION/DESCRIPTION
151HE
1
A
1
T
A
2S12
XXXX
BO 10
e1
MODEL
FEATURES LINEARITY
ELECTRICAL
ANGLE
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
PACKAGING
LEAD
FINISH
1: Continuous rotation
and no antirotation
pin
A: ± 1 %
1: 90°
T: Turrets A: Analog CW 2: 3.175 mm
B: ± 0.5 %
2: 180° Z: Custom B: Analog CCW 9: Special
3: 270°
C: PWM CW P: Plain
4: 360°
D: PWM CCW S: Slotted
9: Other angles
Z: Other output Z: Other type
Box of
10 pieces
Shaft length from mounting face 12 mm to 72 mm max. per step of 5 mm
SAP PART NUMBERING GUIDELINES
151HE
1
B
9
MODEL
MECHANICAL
FEATURES
LINEARITY
ELECTRICAL
ANGLE
Z
OUTPUT TYPE
C
OUTPUT
SIGNAL
2P22
SHAFT TYPE
XXXX
SPECIAL
REQUEST
Revision: 27-Mar-15
1
Document Number: 57102
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000