150D Datasheet, PDF (1/10 Pages) Vishay Siliconix – Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead

150D
Vishay Sprague
Solid-Electrolyte TANTALEX^® Capacitors
Hermetically-Sealed, Axial-Lead
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %,
± 10 % standard. ± 5 % available as special.
Dissipation Factor: At 120 Hz, + 25 °C. Dissipation factor,
as determined from the expression 2πfRC, shall not exceed
the values listed in the Standard Ratings Tables.
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings Tables.
FEATURES
• Terminations: Tin/lead (SnPb), 100 % Tin
(RoHS compliant)
Available
• These high performance, hermetically-sealed
TANTALEX^® capacitors have set the standard for
solid-electrolyte tantalum capacitors for more
than three decades.
RoHS*
COMPLIANT
• High capacitance, low DCL, low dissipation factor and
exceptional operating stability.
• Performance and reliability have been proven in
commercial, industrial and military applications.
• Available in four case codes and capacitors and are
supplied with plastic-film insulation.
• Terminals are solid, tinned nickel wire leads.
• The Military equivalent to the 150D is the CSR13 which is
qualified to MIL-C-39003/01.
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
At +125 °C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings Tables.
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 2000 h or derated DC voltage applied
at + 125 °C for 1000 h
Following the life test:
1. DCL shall not exceed 125 % of the initial requirement
2. Dissipation Factor shall meet the initial requirement
3. Change in capacitance shall not exceed ± 5 %
DIMENSIONS in inches [millimeters]
1.500 ± 0.250
[38.10 ± 6.35]
1.500 ± 0.250
[38.10 ± 6.35]
L
-
+
D
DIA.
CASE CODE
A
B
R
S
SOLID TINNED
NICKEL LEADS
WITH INSULATING SLEEVE ⁽¹⁾
D
L
0.135 ± 0.016
[3.43 ± 0.41]
0.185 ± 0.016
[4.70 ± 0.41]
0.289 ± 0.016
[7.34 ± 0.41]
0.351 ± 0.016
[8.92 ± 0.41]
0.286 ± 0.031
[7.26 ± 0.79]
0.474 ± 0.031
[12.04 ± 0.79]
0.686 ± 0.031
[17.42 ± 0.79]
0.786 ± 0.031
[19.96 ± 0.79]
J
MAX..
0.047 [1.19] MAX.
0.125 [3.18] MAX.
J (MAXIMUM)
0.422
[10.720]
0.610
[15.490]
0.822
[20.880]
0.922
[23.420]
AWG
NO.
24
24
22
22
Note:
(1) _{When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body}
* Pb containing terminations are not RoHs compliant, exemptions may apply
LEAD SIZE
NOMINAL
DIAMETER
0.020
[0.51]
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
www.vishay.com
18
For technical questions, contact: [e-mail]
Document Number: 40015
Revision: 16-Jan-08