134D687X9050K6 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Wet Tantalum HI-TMP Capacitors Tantalum Case

www.vishay.com
134D
Vishay Sprague
Wet Tantalum HI-TMP^® Capacitors Tantalum Case with
Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C (to + 200 °C
with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C; ± 20 %
standard; ± 10 %
FEATURES
• High capacitance
• Hermetically sealed, tantalum case
• + 200 °C high temperature
• Terminations: Axial, standard tin/lead (SnPb)
• 100 % tin (RoHS-compliant) available
• Mounting: Through-hole
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
APPLICATIONS
• Industrial
• Petroleum exploration
• High temperature/high stress environment
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings tables.
Life Test: Capacitors are capable of withstanding a 500 h
life test at a temperature of + 200 °C at the applicable
derated DC working voltage.
ORDERING INFORMATION
134D
227
X0
TYPE
CAPACITANCE
CAPACITANCE
TOLERANCE
100
DC VOLTAGE RATING
AT + 85 °C
K
CASE
CODE
6
STYLE NUMBER
E3
RoHS COMPLIANT
This is expressed in
picofarads. The first
two digits are the
significant figures. The
third is the number of
zeros to follow
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V)
See
Ratings
and Case
Codes
table
High temperature
8 = No outer
insulating sleeve
6 = High
temperature
film insulation
(above + 125 °C)
E3 = 100 % tin
termination
(RoHS compliant design)
Blank = SnPb
termination
(standard design)
Note
• Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the
unit weight.
DIMENSIONS in inches [millimeters]
E
L₁
E
D
0.0253 ± 0.002 [0.64 ± 0.05] dia.
(No. 22 AWG tinned nickel leads
solderable and weldable)
Weld
L₂
Tantalum
CASE CODE
TYPE 134D CLR 79/81 EQUIV.
D
L₁ ⁽¹⁾
L₂ (Max.)
E
WEIGHT (g)
(Max.)
C
T1
0.188 ± 0.016 0.453 + 0.031/- 0.016
[4.78 ± 0.41]
[11.51 + 0.79/- 0.41]
0.734
[18.64]
1.500 ± 0.250
[38.10 ± 6.35]
2.6
F
T2
0.281 ± 0.016 0.641 + 0.031/- 0.016
[7.14 ± 0.41]
[16.28 + 0.79/- 0.41]
0.922
[23.42]
2.250 ± 0.250
[57.15 ± 6.35]
6.2
T
T3
0.375 ± 0.016 0.766 + 0.031/- 0.016
[9.53 ± 0.41]
[19.46 + 0.79/- 0.41]
1.047
[26.59]
2.250 ± 0.250
[57.15 ± 6.35]
11.6
K
T4
0.375 ± 0.016 1.062 + 0.031/- 0.016
[9.53 ± 0.41]
[26.97 + 0.79/- 0.41]
1.343
[34.11]
2.250 ± 0.250
[57.15 ± 6.35]
17.7
Note
(1) _{For insulated parts, add 0.015 inches [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body.}
Revision: 21-Mar-13
1
Document Number: 40072
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000