134D Datasheet, PDF (1/3 Pages) Vishay Siliconix – Wet Tantalum HI TMP® Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation

134D
Vishay Sprague
Wet Tantalum HI TMP^® Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
for - 55 °C to + 200 °C Operation
FEATURES
Vishay 134D HI TMP^® represents a major
breakthrough in wet tantalum capacitor technology
for high temperature (+ 200 °C) applications such
as that seen in the petroleum exploration industry.
Its unique design provides for the highest
Pb-free
Available
RoHS*
COMPLIANT
capacitance per unit volume. The design
facilitates a doubling of capacitance when compared with
conventional wet tantalum products.
The 134D is housed in an all tantalum, hermetically sealed
case and is manufactured to withstand high stress and
hazardous environments.
• Terminations: standard tin/lead (SnPb)
• 100 % Tin (RoHS compliant) available
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C (to + 200 °C with
voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C; ± 20 %
standard; ± 10 %
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings Tables.
Life Test: Capacitors are capable of withstanding a 500 h life
test at a temperature of + 200 °C at the applicable derated
DC working voltage.
ORDERING INFORMATION
134D
TYPE
227
CAPACITANCE
X0
CAPACITANCE
TOLERANCE
100
DC VOLTAGE RATING
AT + 85 °C
K
CASE
CODE
6
STYLE NUMBER
This is expressed in
picofarads. The first
two digits are the
significant figures. The
third is the number of
zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts. To
complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V).
See
Ratings
and Case
Codes
Table.
High
Temperature
8 = No outer
insulating sleeve
6 = High
temperature film
insulation
(above + 125 °C)
E3
ROHS
COMPLIANT
E3 = 100 % tin
termination
(RoHS compliant
design)
Blank = SnPb
termination
(standard design)
Note
Packaging: The use of formed plastic trays for packaging this type of axial lead component is standard. Tape and reel is not recommended
due to the unit weight.
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 40072
Revision: 25-Aug-08
For technical questions, contact: [e-mail]
www.vishay.com
87