132 Datasheet, PDF (1/3 Pages) Coilcraft lnc. – Fixed RF Inductors

www.vishay.com
Model 132
Vishay Spectrol
1 ⁵/₁₆" (33.3 mm) Low Cost Industrial Single Turn
Wirewound, Bushing Mount Type Potentiometer
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, single turn wirewound
Output type
Output by turrets
Market appliance
Dimensions
Industrial
1 ⁵/₁₆" (33.3 mm)
FEATURES
• Suitable model for all industrial applications
• Center tap available
• Continuous rotation and mechanical stops
both standard
• Large electrical angle: 352° ± 2°
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
PARAMETER
Total Resistance
Tolerance: 50  and Above
Below 50 
Linearity (independent)
Total Resistance
5  to 20 
20  to 200 
200  and above
Noise
Power Rating
Electrical Angle
Continuous Rotation
Stops
Insulation Resistance
Dielectric Strength
Absolute Minimum Resistance
Minimum Voltage
Temperature Coefficient of Resistance
MIL-PRF-12934 TEST PROCEDURES APPLY
STANDARD
SPECIAL
5  to 20 k
to 35 k
±3%
±1%
±5%
±3%
STANDARD
BEST PRACTICAL
± 1.0 %
± 1.0 %
± 0.5 %
100  ENR
40 °C ambient
2.75 W
derated to zero at 125 °C
± 0.75 %
± 0.50 %
± 0.25 %
352° ± 2°
340° ± 5°
1000 M minimum at 500 V_DC
1000 V_RMS, 60 Hz
1.0 % of total resistance or 0.5 W whichever is greater
0.5 % maximum
Refer to standard resistance element data
MATERIAL SPECIFICATIONS
Housing
Molded glass filled thermoplastic
Rear Lid
Glass filled thermoset plastic
Shaft
Stainless steel, non-magnetic
Terminals
Brass, plated for solderability,
Non-passivated
Mount Hardware
Lockwasher Internal Tooth: 
Panel Nut:
Steel, nickel plated
Brass, nickel plated
ENVIRONMENTAL SPECIFICATIONS
Vibration
15 g thru 2000 Hz
Shock
50 g
Salt Spray
48 h
Rotational Life
Shaft Revolutions
500 000
Operating Temperature Range
- 55 °C to + 125 °C
ORDERING INFORMATION/DESCRIPTION
132
B
0
0
20K
BO10
MODEL
BUSHING
MOUNT
MECHANICAL
OPTIONS
OTHER OPTIONAL
FEATURES
OHMIC VALUE
PACKAGING
0. Continuous
2. Stops
0. Standard (end taps)
1. Center tap (within
5° of electrical center)
Box of 10 pieces
Other characteristics will be standard as described on this specification sheet. If special characteristics are required such as special linearity
tolerance, special resistance tolerance, non-linear functions, etc., please state these on your order.
Revision: 12-Apr-13
1
Document Number: 57096
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000