128SAL-RPM Datasheet, PDF (1/10 Pages) Vishay Siliconix – Aluminum Capacitors Solid Al, Radial Pearl Miniature

128 SAL-RPM
Vishay BCcomponents
Aluminum Capacitors Solid Al,
Radial Pearl Miniature
Fig.1 Component outlines
123
SAL-A
axial
version
128
SAL-RPM
FEATURES
• Polarized aluminum electrolytic capacitors,
solid electrolyte MnO₂
• Radial leads, max. height 10 mm, resin
dipped, orange colored
RoHS
COMPLIANT
• Extremely long useful life, 20 000 hours/125 °C
• Extended high temperature range up to 175 °C
• Excellent low temperature, impedance and ESR behaviour
• Charge and discharge proof, application with 0 Ω
resistance allowed
• Reverse DC voltage up to 0.3 x U_R allowed
• AC voltage up to 0.8 x U_R allowed
175 °C
solid SMD
175 TMP
APPLICATIONS
• Audio-video, automotive, industrial high temperature and
telecommunication
• Smoothing, filtering and buffering
• For small power supplies, DC/DC converters
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Maximum case sizes
(H x W x T in mm)
10 x 7 x 3.5
to 10 x 8 x 6
Rated capacitance range
(E6 series), C_R
Tolerance on C_R
Rated voltage range, U_R
Category temperature range:
U_R = 6.3 to 40 V
U_C = 6.3 to 25 V
Endurance test at 125 °C
Useful life at 125 °C
Useful life at 175 °C
Useful life at 40 °C, I_R applied
Shelf life at 0 V, 125 °C
Based on sectional
specification
Climatic category IEC 60068
0.22 µF to 68 µF
± 20 %
6.3 V to 40 V
- 55 °C to + 85 °C
- 55 °C to + 125 °C
10 000 hours
20 000 hours
2000 hours
> 300 000 hours
500 hours
IEC 60384-4/EN 130300
55/125/56
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in µF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V) and category voltage if applicable
• Date code in accordance with IEC60062
• Name of manufacturer
• ‘I’ sign to indicate the negative terminal
• ‘+’ sign to identify the positive terminal
• Series number
MOUNTING
When bending, cutting or straightening the leads, ensure that
the capacitor body is relieved of stress.
Bending after soldering must be avoided.
Document Number: 28354
Revision: 23-Jun-08
For technical questions, contact: [e-mail]
www.vishay.com
153