109D_08 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Wet Tantalum Capacitors Sintered Anode TANTALEX® Capacitors for Operation to + 125 °C, Elastomer-Sealed

109D
Vishay
Wet Tantalum Capacitors Sintered Anode TANTALEX^®
Capacitors for Operation to + 125 °C, Elastomer-Sealed
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C.
(to + 125 °C with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %
standard. ± 10 %, ± 5 % available as special.
DC Leakage Current (DCL max.):
At + 25 °C, + 85 °C, + 125 °C: Leakage current shall not
exceed the values listed in the Standard Ratings Tables.
Life Test: Capacitors are capable of withstanding a
2000 h life test at a temperature of + 85 °C or + 125 °C at the
applicable DC working voltage.
FEATURES
• Terminations: standard tin/lead (SnPb),
100 % tin (RoHS compliant) available
Pb-free
• Vishay Sprague model 109D tubular ^Available
elastomer-sealed, sintered anode TANTALEX^® _RoHS*
capacitors fill the basic requirements for COMPLIANT
applications where a superior quality, reliable
design for industrial, automotive and telecommunications
application is desired.
• Model 109D capacitors are the commercial equivalents of
Tansitor style WC, UWC, Mallory-NACC style TLS, TLH
and the Military Style CL64 and CL65, designed to meet
the performance requirements of Military Specification
MIL-DTL-3965.
Following the life test:
1. DCL shall not exceed the initial requirements or 1 µA,
whichever is greater.
2. The ESR shall meet the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement. For capacitors with voltage ratings of
15 WVDC and below, change in capacitance shall not
exceed + 10 %, - 25 % from the initial measurement.
ORDERING INFORMATION
109D
MODEL
207
CAPACITANCE
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow
X0
CAPACITANCE
TOLERANCE
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
Special Order
006
DC VOLTAGE RATING
AT + 85 °C
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an “R”
(6R3 = 6.3 V)
C
0
CASE CODE STYLE NUMBER
E3
RoHS COMPLIANT
See Ratings
and
Case Codes
Table
0 = No outer sleeve. E3 = 100 % tin termination
Standard
(RoHS compliant)
2 = Outer plastic film Blank = SnPb termination
insulation
(standard design)
Note
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to
the unit weight.
DIMENSIONS in inches [millimeters]
L
-
0.250 [6.35]
Max.
+
0.025 [6.35] Dia. (No. 22 AWG)
D
Tinned Solderable Leads
CASE
BARE TUBE
CODE
D
L
C 0.188 ± 0.016 [4.78 ± 0.41] 0.453 + 0.031 - 0.016 [11.51 + 0.79 - 0.41]
F 0.281 ± 0.016 [7.14 ± 0.41] 0.641 + 0.031 - 0.016 [16.28 + 0.79 - 0.41]
T 0.375 ± 0.016 [9.53 ± 0.41] 0.766 + 0.031 - 0.016 [19.46 + 0.79 - 0.41]
K ⁽¹⁾ 0.375 ± 0.016 [9.53 ± 0.41] 1.062 + 0.031 - 0.016 [26.97 + 0.79 - 0.41]
Note
(1) _{Replaces previous W case.}
* Pb containing terminations are not RoHS compliant, exemptions may apply
WITH PLASTIC-FILM
INSULATING SLEEVE
D Max.
L Max.
0.219 [5.56] 0.608 [15.45]
0.312 [7.92] 0.796 [20.22]
0.406 [10.31] 0.921 [23.40]
0.406 [10.31] 1.217 [30.91]
LEAD LENGTH
1.500 ± 0.250 [38.10 ± 6.35]
2.250 ± 0.250 [57.15 ± 6.35]
2.250 ± 0.250 [57.15 ± 6.35]
2.250 ± 0.250 [57.15 ± 6.35]
www.vishay.com
12
For technical questions, contact: [e-mail]
Document Number: 40023
Revision: 17-Mar-08