109D Datasheet, PDF (1/6 Pages) Vishay Siliconix – Wet Tantalum Capacitors Sintered Anode TANTALEX® Capacitors For Operation to + 125 °C, Elastomer-Sealed

109D
Vishay
Wet Tantalum Capacitors Sintered Anode
TANTALEX^® Capacitors For Operation to + 125 °C,
Elastomer-Sealed
FEATURES
Terminations: standard Tin/lead (SnPb),
100 % Tin (RoHS compliant) available
Vishay Sprague Model 109D tubular
elastomer-sealed, sintered anode TANTALEX®
capacitors fill the basic requirements for
applications where a superior quality, reliable
Pb-free
Available
RoHS*
COMPLIANT
design for industrial, automotive and
telecommunications application is desired.
Model 109D capacitors are the commercial equivalents of
Tansitor Style WC, UWC, Mallory-NACC Style TLS, TLH
and the Military Style CL64 and CL65, designed to meet
the performance requirements of Military Specification
MIL-DTL-3965.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C.
(to + 125 °C with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %
standard. ± 10 %, ± 5 % available as special.
DC Leakage Current (DCL Max.):
At + 25 °C, + 85 °C, + 125 °C: Leakage current shall not
exceed the values listed in the Standard Ratings Tables.
Life Test: Capacitors are capable of withstanding a
2000 hour life test at a temperature of + 85 °C or + 125 °C at
the applicable DC working voltage.
Following the life test:
1. DCL shall not exceed the initial requirements or 1 µA,
whichever is greater.
2. The ESR shall meet the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement. For capacitors with voltage ratings
of 15 WVDC and below, change in capacitance shall
not exceed + 10 %, - 25 % from the initial measuremen. t
ORDERING INFORMATION
109D
MODEL
207
CAPACITANCE
X0
CAPACITANCE
TOLERANCE
006
DC VOLTAGE RATING
AT + 85 °C
C
CASE CODE
0
STYLE NUMBER
E3
RoHS COMPLIANT
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros to
follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
Special Order.
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an "R"
(6R3 = 6.3 volts).
See Ratings
and
Case Codes
Table.
0 = No outer sleeve. E3 = 100 % tin termination
Standard.
(RoHS compliant)
2 = Outer plastic film Blank = SnPb termination
insulation.
(standard design)
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to
the unit weight.
DIMENSIONS in inches [millimeters]
L
-
0.250 [6.35]
Max.
+
0.025 [6.35] Dia.
(No. 22 AWG) Tinned
Solderable Leads
D
CASE
CODE
D
C 0.188 ± 0.016 [4.78 ± 0.41]
F 0.281 ± 0.016 [7.14 ± 0.41]
T 0.375 ± 0.016 [9.53 ± 0.41]
K¹⁾ 0.375 ± 0.016 [9.53 ± 0.41]
1) _{Replaces previous W case.}
BARE TUBE
L
0.453 + 0.031 - 0.016 [11.51 + 0.79 - 0.41]
0.641 + 0.031 - 0.016 [16.28 + 0.79 - 0.41]
0.766 + 0.031 - 0.016 [19.46 + 0.79 - 0.41]
1.062 + 0.031 - 0.016 [26.97 + 0.79 - 0.41]
WITH PLASTIC-FILM
INSULATING SLEEVE
D (Max.)
L (Max.)
0.219 [5.56] 0.608 [15.45]
0.312 [7.92] 0.796 [20.22]
0.406 [10.31] 0.921 [23.40]
0.406 [10.31] 1.217 [30.91]
LEAD LENGTH
1.500 ± 0.250 [38.10 ± 6.35]
2.250 ± 0.250 [57.15 ± 6.35]
2.250 ± 0.250 [57.15 ± 6.35]
2.250 ± 0.250 [57.15 ± 6.35]
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
2
For technical questions, contact: [e-mail]
Document Number: 40023
Revision: 19-Jun-07