PI2007-EVAL1 Datasheet, PDF (8/10 Pages) Vicor Corporation – PI2007-EVAL1 48V Bus High Side Active ORing

Figure 4: Plot of PI2007 response time to reverse current detection
PCB Layout
Test Setup:
DUT: PI2007-EVAL1
Vin1 = 48V
Vin2 = 48V
Output Load = 6A
Test:
Both input sources are
turned on and sharing the
load current, then applied a
short for 1ms with a fast turn
on MOSFET between Vin1
and Rtn.
Test purpose:
To show the PI2007 response
to a fault condition, where
the output of the input
source is shorted or tried to
source current from the load
(Vout)
Figure 5: PI2007-EVAL1 layout top layer. Scale 2.0:1
Picor Corporation • picorpower.com
Figure 6: PI2007-EVAL1 layout bottom layer 2. Scale 2.0:1
PI2007-EVAL1 User Guide Rev. 1.1 Page 8 of 10