P024F048T12AL_1 Datasheet, PDF (2/2 Pages) Vicor Corporation – PRM Regulator and VTM Current Multiplier

VTM Mechanical Outline Drawing
PRM Mechanical Outline Drawing
RECOMMENDED LAND PATTERN
( COMPONENT SIDE SHOWN )
RECOMMENDED LAND PATTERN
( COMPONENT SIDE SHOWN )
BOTTOM VIEW
NOTES:
mm
1 DIMENSIONS ARE i h
NOTES:
mm
1. DIMENSIONS ARE inch .
2. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE:
.X / [.XX] = +/-0.25 / [.01]; .XX / [.XXX] = +/-0.13 / [.005]
3. PRODUCT MARKING ON TOP SURFACE
DXF and PDF files are available on vicorpower.com
1/2 VTM Mechanical Outline Drawing
BOTTOM VIEW
NOTES:
mm
1. DIMENSIONS ARE inch .
2. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE:
.X / [.XX] = +/-0.25 / [.01]; .XX / [.XXX] = +/-0.13 / [.005]
3. PRODUCT MARKING ON TOP SURFACE
DXF and PDF files are available on vicorpower.com
The products described on this document are protected by the following U.S. Patents Numbers: PRMs: 5,945,130; 6,403,009; 6,710,257; 6,788,033; 6,940,013; 6,969,909; 7,038,917;
7,154,250; 7,166,898; 7,187,263; 7,202,646; 7,361,844; 7,368,957; RE40,072; D496,906; D506,438; D509,472; and for use under 6,975,098 and 6,984,965 VTMs: 5,945,130;
6,403,009; 6,710,257; 6,911,848; 6,930,893; 6,934,166; 6,940,013; 6,969,909; 7,038,917; 7,145,186; 7,166,898; 7,187,263; 7,202,646; 7,361,844; D496,906; D505,114; D506,438;
D509,472; and for use under 6,975,098 and 6,984,965
vicorpower.com
800-735-6200
Rev. 1.7
9/2009
Page 2 of 2